You can not select more than 25 topics
Topics must start with a letter or number, can include dashes ('-') and can be up to 35 characters long.
Anthony Hinsinger
ff26a7aeb8
|
7 years ago | |
|---|---|---|
| sensors | 7 years ago | |
| .clang-format | 7 years ago | |
| .gitignore | 7 years ago | |
| .mbedignore | 7 years ago | |
| Cayenne-LPP.lib | 8 years ago | |
| README.md | 7 years ago | |
| lora_radio_helper.h | 7 years ago | |
| main.cpp | 7 years ago | |
| mbed-lora-radio-drv.lib | 7 years ago | |
| mbed-os.lib | 7 years ago | |
| mbed_app.json.sample | 7 years ago | |
| mbedtls_lora_config.h | 7 years ago | |
| minimal-printf.lib | 7 years ago | |
README.md
WaveOfHoney - a lorawan beehive sensor
Compilation
Clone this repository, then :
mbed deploy
mbed config root .
# set the desired compiler
mbed toolchain GCC_ARM
# set the desired board
mbed target NUCLEO_L073RZ
# set-up the compiler path if needed
mbed config -G GCC_ARM_PATH /opt/gcc-arm-none-eabi-7-2017-q4-major/bin
cp mbed_app.json.sample mbed_app.json
# modify lora.device-eui, lora.application-eui and lora.application-key in mbed_app.json
mbed compile --profile minimal-printf/profiles/release.json
Then you can use stm32flash or - may be better - a stlink interface to copy the generated .bin file onto the RAK811.
Notes
Tested boards
- MTB_RAK811
- NUCLEO_L073RZ + SX1272MB2xAS
use STLink from a Nucleo board with the RAK811 board
From STlink CN4 Connector to RAK811 "shortest" connector (pin 1 at the same side of antenna connectors)
2 -> 3 (CLK)
3 -> 1 (GND)
4 -> 4 (DATA)
5 -> 2 (RST)
rewire STLink on a cutted Nucleo board
From STlink CN4 Connector to Nucleo CN7
2 -> 15 (CLK)
3 -> 19,20,22 (GND)
4 -> 13 (DATA)
5 -> 14 (RST)
From STLink CN3 Connector to Nucleo CN7 (stdio through USB)
rx -> 1 (USART4_TX)
tx -> 2 (USART4_RX)