Started nvstore tests

README.md

@@ -15,7 +15,7 @@ mbed target NUCLEO_L073RZ
 mbed config -G GCC_ARM_PATH /opt/gcc-arm-none-eabi-7-2017-q4-major/bin
 cp mbed_app.json.sample mbed_app.json
 # modify lora.device-eui, lora.application-eui and lora.application-key in mbed_app.json
-mbed compile --profile minimal-printf/profiles/release.json
+mbed compile --profile profiles/release.json
 ```
 
 Then you can use stm32flash or - may be better - a stlink interface to copy the generated .bin file onto the RAK811.

main.cpp

@@ -4,6 +4,7 @@
 #include "lorawan/LoRaWANInterface.h"
 #include "lorawan/system/lorawan_data_structures.h"
 #include "mbed.h"
+#include "nvstore.h"
 
 #if MBED_CONF_APP_DHT_ENABLED
 #include "DHT.h"
@@ -17,12 +18,6 @@ using namespace events;
 
 uint8_t rx_buffer[LORAMAC_PHY_MAXPAYLOAD];
 
-/*
- * Sets up an application dependent transmission timer in ms. Used only when Duty Cycling is off for
- * testing
- */
-#define TX_TIMER 30000 //600000
-
 /**
  * Maximum number of events for the event queue.
  * 16 is the safe number for the stack events, however, if application
@@ -43,6 +38,23 @@ static CayenneLPP cayenne(51);
 
 #if MBED_CONF_APP_BATTERY_ENABLED
 AnalogIn bat(MBED_CONF_APP_BATTERY_ADC);
+AnalogIn vrefint(ADC_VREF);
+
+static float battery_voltage() {
+    float vbat = bat.read();
+    double vdd = (1.224f) / vrefint.read();
+
+    return vbat * MBED_CONF_APP_BATTERY_RATIO * vdd;
+}
+
+static uint8_t battery_level() {
+    float vbat = battery_voltage();
+
+    double ratio = 253.0f / (4.2f - 3.3f);
+    int value = ratio * (vbat - 3.4f) + 1.0f;
+
+    return value < 1 ? 1 : (value > 254 ? 254 : value);
+}
 #endif
 
 #if MBED_CONF_APP_DHT_ENABLED
@@ -50,59 +62,86 @@ DHT dht(MBED_CONF_APP_DHT_DATA, MBED_CONF_APP_DHT_TYPE);
 #endif
 
 #if MBED_CONF_APP_HX711_ENABLED
-HX711 loadcell(MBED_CONF_APP_HX711_CLK, MBED_CONF_APP_HX711_DATA);
+HX711 loadcell(MBED_CONF_APP_HX711_DATA, MBED_CONF_APP_HX711_CLK);
 #endif
 
-//DigitalOut led(LED1, 1);
-
 int main(void) {
-
     lorawan_status_t retcode;
 
+#if NVSTORE_ENABLED
+    NVStore &nvstore = NVStore::get_instance();
+    int rc;
+    uint16_t key;
+    // Values read or written by NVStore need to be aligned to a uint32_t address (even if their sizes
+    // aren't)
+    uint32_t value;
+    // Initialize NVstore. Note that it can be skipped, as it is lazily called by all other APIs
+    rc = nvstore.init();
+    printf("Init NVStore. \n");
+    // Show NVStore size, maximum number of keys and area addresses and sizes
+    printf("NVStore size is %d.\n", nvstore.size());
+    printf("NVStore max number of keys is %d (out of %d possible ones in this flash configuration).\n",
+            nvstore.get_max_keys(), nvstore.get_max_possible_keys());
+    printf("NVStore areas:\n");
+    for (uint8_t area = 0; area < NVSTORE_NUM_AREAS; area++) {
+        uint32_t area_address;
+        size_t area_size;
+        nvstore.get_area_params(area, area_address, area_size);
+        printf("Area %d: address 0x%08lx, size %d (0x%x).\n", area, area_address, area_size, area_size);
+    }
+#else
+    printf("NVStore is disabled for this board\n");
+#endif
+
+while(1) {
+    wait(1);
+}
+
 #if MBED_CONF_APP_HX711_ENABLED
+    loadcell.powerDown();
     loadcell.setScale(MBED_CONF_APP_HX711_SCALE);
     loadcell.setOffset(MBED_CONF_APP_HX711_OFFSET);
-    loadcell.powerDown();
 #endif
 
     // Initialize LoRaWAN stack
     if(lorawan.initialize(&ev_queue) != LORAWAN_STATUS_OK) {
-        printf("\r\n LoRa initialization failed! \r\n");
+        debug("\r\n LoRa initialization failed! \r\n");
         return -1;
     }
 
-    printf("\r\n Mbed LoRaWANStack initialized \r\n");
+    debug("\r\n Mbed LoRaWANStack initialized \r\n");
 
     callbacks.events = mbed::callback(lora_event_handler);
+#if MBED_CONF_APP_BATTERY_ENABLED
+    callbacks.battery_level = mbed::callback(battery_level);
+#endif
     lorawan.add_app_callbacks(&callbacks);
 
     // Set number of retries in case of CONFIRMED messages
     if(lorawan.set_confirmed_msg_retries(CONFIRMED_MSG_RETRY_COUNTER) != LORAWAN_STATUS_OK) {
-        printf("\r\n set_confirmed_msg_retries failed! \r\n\r\n");
+        debug("\r\n set_confirmed_msg_retries failed! \r\n\r\n");
         return -1;
     }
 
-    printf("\r\n CONFIRMED message retries : %d \r\n", CONFIRMED_MSG_RETRY_COUNTER);
+    debug("\r\n CONFIRMED message retries : %d \r\n", CONFIRMED_MSG_RETRY_COUNTER);
 
     // Enable adaptive data rate
     if(lorawan.enable_adaptive_datarate() != LORAWAN_STATUS_OK) {
-        printf("\r\n enable_adaptive_datarate failed! \r\n");
+        debug("\r\n enable_adaptive_datarate failed! \r\n");
         return -1;
     }
 
-    printf("\r\n Adaptive data  rate (ADR) - Enabled \r\n");
-
-    //led = 0;
+    debug("\r\n Adaptive data  rate (ADR) - Enabled \r\n");
 
     retcode = lorawan.connect();
 
     if(retcode == LORAWAN_STATUS_OK || retcode == LORAWAN_STATUS_CONNECT_IN_PROGRESS) {
     } else {
-        printf("\r\n Connection error, code = %d \r\n", retcode);
+        debug("\r\n Connection error, code = %d \r\n", retcode);
         return -1;
     }
 
-    printf("\r\n Connection - In Progress ...\r\n");
+    debug("\r\n Connection - In Progress ...\r\n");
 
     // make your event queue dispatching events forever
     ev_queue.dispatch_forever();
@@ -116,25 +155,25 @@ int main(void) {
 static void send_message() {
     int16_t retcode;
 
-#if MBED_CONF_APP_BATTERY_ENABLED
-    float vbat = bat.read();
-    vbat = vbat * 5 / 3 * 3.3f;
-    cayenne.addAnalogInput(1, vbat);
+#if MBED_CONF_APP_BATTERY_ENABLED && MBED_CONF_APP_BATTERY_IN_LPP
+    cayenne.addAnalogInput(1, battery_voltage());
 #endif
 
 #if MBED_CONF_APP_DHT_ENABLED
     int err = dht.read();
     if(err == DHT::SUCCESS) {
         cayenne.addTemperature(1, dht.getTemperature());
-        cayenne.addRelativeHumidity(2, dht.getHumidity());
+        cayenne.addRelativeHumidity(1, dht.getHumidity());
     } else {
-        printf("Error code : %d\r\n", err);
+        debug("Error code : %d\r\n", err);
     }
 #endif
 
 #if MBED_CONF_APP_HX711_ENABLED
     loadcell.powerUp();
-    cayenne.addAnalogInput(2, loadcell.getUnits(5));
+    if(loadcell.waitReadyRetry(20, 100)) {
+        cayenne.addAnalogInput(2, loadcell.getUnits(5));
+    }
     loadcell.powerDown();
 #endif
 
@@ -147,12 +186,12 @@ static void send_message() {
                            MSG_UNCONFIRMED_FLAG);
 
     if(retcode < 0) {
-        retcode == LORAWAN_STATUS_WOULD_BLOCK ? printf("send - WOULD BLOCK\r\n")
-                                              : printf("\r\n send() - Error code %d \r\n", retcode);
+        retcode == LORAWAN_STATUS_WOULD_BLOCK ? debug("send - WOULD BLOCK\r\n")
+                                              : debug("\r\n send() - Error code %d \r\n", retcode);
         return;
     }
 
-    printf("\r\n %d bytes scheduled for transmission \r\n", retcode);
+    debug("\r\n %d bytes scheduled for transmission \r\n", retcode);
     cayenne.reset();
 }
 
@@ -165,17 +204,17 @@ static void receive_message() {
                               MSG_CONFIRMED_FLAG | MSG_UNCONFIRMED_FLAG);
 
     if(retcode < 0) {
-        printf("\r\n receive() - Error code %d \r\n", retcode);
+        debug("\r\n receive() - Error code %d \r\n", retcode);
         return;
     }
 
-    printf(" Data:");
+    debug(" Data:");
 
     for(uint8_t i = 0; i < retcode; i++) {
-        printf("%x", rx_buffer[i]);
+        debug("%x", rx_buffer[i]);
     }
 
-    printf("\r\n Data Length: %d\r\n", retcode);
+    debug("\r\n Data Length: %d\r\n", retcode);
 
     memset(rx_buffer, 0, LORAMAC_PHY_MAXPAYLOAD);
 }
@@ -183,21 +222,21 @@ static void receive_message() {
 static void lora_event_handler(lorawan_event_t event) {
     switch(event) {
         case CONNECTED:
-            //led = 1;
-            printf("\r\n Connection - Successful \r\n");
+            debug("\r\n Connection - Successful \r\n");
             if(MBED_CONF_LORA_DUTY_CYCLE_ON) {
                 send_message();
             } else {
-                ev_queue.call_every(TX_TIMER, send_message);
+                send_message();
+                ev_queue.call_every(MBED_CONF_APP_TX_TIMER, send_message);
             }
 
             break;
         case DISCONNECTED:
             ev_queue.break_dispatch();
-            printf("\r\n Disconnected Successfully \r\n");
+            debug("\r\n Disconnected Successfully \r\n");
             break;
         case TX_DONE:
-            printf("\r\n Message Sent to Network Server \r\n");
+            debug("\r\n Message Sent to Network Server \r\n");
             if(MBED_CONF_LORA_DUTY_CYCLE_ON) {
                 send_message();
             }
@@ -206,22 +245,22 @@ static void lora_event_handler(lorawan_event_t event) {
         case TX_ERROR:
         case TX_CRYPTO_ERROR:
         case TX_SCHEDULING_ERROR:
-            printf("\r\n Transmission Error - EventCode = %d \r\n", event);
+            debug("\r\n Transmission Error - EventCode = %d \r\n", event);
             // try again
             if(MBED_CONF_LORA_DUTY_CYCLE_ON) {
                 send_message();
             }
             break;
         case RX_DONE:
-            printf("\r\n Received message from Network Server \r\n");
+            debug("\r\n Received message from Network Server \r\n");
             receive_message();
             break;
         case RX_TIMEOUT:
         case RX_ERROR:
-            printf("\r\n Error in reception - Code = %d \r\n", event);
+            debug("\r\n Error in reception - Code = %d \r\n", event);
             break;
         case JOIN_FAILURE:
-            printf("\r\n OTAA Failed - Check Keys \r\n");
+            debug("\r\n OTAA Failed - Check Keys \r\n");
             break;
         default:
             MBED_ASSERT("Unknown Event");

mbed_app.json

@@ -0,0 +1,126 @@
+{
+    "config": {
+        "tx-timer":            { "value": 30000 },
+        "lora-radio": {
+            "help": "Which radio to use (options: SX1272,SX1276)",
+            "value": "SX1276"
+        },
+        "main_stack_size":     { "value": 4096 },
+        "lora-spi-mosi":       { "value": "NC" },
+        "lora-spi-miso":       { "value": "NC" },
+        "lora-spi-sclk":       { "value": "NC" },
+        "lora-cs":             { "value": "NC" },
+        "lora-reset":          { "value": "NC" },
+        "lora-dio0":           { "value": "NC" },
+        "lora-dio1":           { "value": "NC" },
+        "lora-dio2":           { "value": "NC" },
+        "lora-dio3":           { "value": "NC" },
+        "lora-dio4":           { "value": "NC" },
+        "lora-dio5":           { "value": "NC" },
+        "lora-rf-switch-ctl1": { "value": "NC" },
+        "lora-rf-switch-ctl2": { "value": "NC" },
+        "lora-txctl":          { "value": "NC" },
+        "lora-rxctl":          { "value": "NC" },
+        "lora-ant-switch":     { "value": "NC" },
+        "lora-pwr-amp-ctl":    { "value": "NC" },
+        "lora-tcxo":           { "value": "NC" },
+        "battery-enabled":     { "value": "false" },
+        "battery-in-lpp":      { "value": "false" },
+        "battery-adc":         { "value": "NC" },
+        "battery-ratio":       { "value": "2.0f" },
+        "dht-enabled":         { "value": "false" },
+        "dht-type":            { "value": "DHT::DHT22" },
+        "dht-data":            { "value": "NC" },
+        "hx711-enabled":       { "value": "false" },
+        "hx711-clk":           { "value": "NC" },
+        "hx711-data":          { "value": "NC" },
+        "hx711-scale":         { "value": "1.0f" },
+        "hx711-offset":        { "value": 0 }
+    },
+    "target_overrides": {
+        "*": {
+            "platform.stdio-convert-newlines": true,
+            "platform.stdio-baud-rate": 115200,
+            "platform.default-serial-baud-rate": 115200,
+            "lora.app-port": 3,
+            "lora.over-the-air-activation": true,
+            "lora.duty-cycle-on": false,
+            "lora.phy": 0,
+            "lora.device-eui": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }",
+            "lora.application-eui": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }",
+            "lora.application-key": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }"
+        },
+
+        "NUCLEO_L073RZ": {
+            "main_stack_size":      1024,
+            "target.lpticker_lptim": 0,
+            "target.clock_source": "USE_PLL_HSI",
+            "lora.duty-cycle-on":  false,
+            "tx-timer":            600000,
+            "lora-radio":          "SX1272",
+            "lora-spi-mosi":       "D11",
+            "lora-spi-miso":       "D12",
+            "lora-spi-sclk":       "D13",
+            "lora-cs":             "D10",
+            "lora-reset":          "A0",
+            "lora-dio0":           "D2",
+            "lora-dio1":           "D3",
+            "lora-dio2":           "D4",
+            "lora-dio3":           "D5",
+            "lora-dio4":           "NC",
+            "lora-dio5":           "NC",
+            "lora-rf-switch-ctl1": "NC",
+            "lora-rf-switch-ctl2": "NC",
+            "lora-txctl":          "NC",
+            "lora-rxctl":          "NC",
+            "lora-ant-switch":     "A4",
+            "lora-pwr-amp-ctl":    "NC",
+            "lora-tcxo":           "NC",
+            "battery-enabled":     true,
+            "battery-in-lpp":      true,
+            "battery-adc":         "A1",
+            "battery-ratio":       "2.0f",
+            "dht-enabled":         true,
+            "dht-data":            "D8",
+            "dht-type":            "DHT::DHT22",
+            "hx711-enabled":       true,
+            "hx711-clk":           "D6",
+            "hx711-data":          "D7",
+            "hx711-scale":         "21000.0f",
+            "hx711-offset":        59600,
+            "nvstore.max_keys": 20,
+            "nvstore.area_1_address": "0x0802e000",
+            "nvstore.area_1_size"   : "0x1000",
+            "nvstore.area_2_address": "0x0802f000",
+            "nvstore.area_2_size"   : "0x1000"
+        },
+
+        "MTB_RAK811": {
+            "lora-radio":          "SX1276",
+            "lora-spi-mosi":       "SPI_RF_MOSI",
+            "lora-spi-miso":       "SPI_RF_MISO",
+            "lora-spi-sclk":       "SPI_RF_SCK",
+            "lora-cs":             "SPI_RF_CS",
+            "lora-reset":          "SPI_RF_RESET",
+            "lora-dio0":           "DIO0",
+            "lora-dio1":           "DIO1",
+            "lora-dio2":           "DIO2",
+            "lora-dio3":           "DIO3",
+            "lora-dio4":           "DIO4",
+            "lora-dio5":           "NC",
+            "lora-rf-switch-ctl1": "NC",
+            "lora-rf-switch-ctl2": "NC",
+            "lora-txctl":          "ANT_CTX_PA",
+            "lora-rxctl":          "ANT_CRX_RX",
+            "lora-ant-switch":     "NC",
+            "lora-pwr-amp-ctl":    "NC",
+            "lora-tcxo":           "RF_TCXO_EN",
+            "battery-enabled":     true,
+            "battery-adc":         "PA_2",
+            "dht-enabled":         true,
+            "dht-data":            "PA_1",
+            "dht-type":            "DHT::DHT22"
+        }
+    },
+    "macros": ["MBEDTLS_USER_CONFIG_FILE=\"mbedtls_lora_config.h\""]
+}

mbed_app.json.sample

@@ -1,293 +0,0 @@
-{
-    "config": {
-        "lora-radio": {
-            "help": "Which radio to use (options: SX1272,SX1276)",
-            "value": "SX1276"
-        },
-        "main_stack_size":     { "value": 4096 },
-        "lora-spi-mosi":       { "value": "NC" },
-        "lora-spi-miso":       { "value": "NC" },
-        "lora-spi-sclk":       { "value": "NC" },
-        "lora-cs":             { "value": "NC" },
-        "lora-reset":          { "value": "NC" },
-        "lora-dio0":           { "value": "NC" },
-        "lora-dio1":           { "value": "NC" },
-        "lora-dio2":           { "value": "NC" },
-        "lora-dio3":           { "value": "NC" },
-        "lora-dio4":           { "value": "NC" },
-        "lora-dio5":           { "value": "NC" },
-        "lora-rf-switch-ctl1": { "value": "NC" },
-        "lora-rf-switch-ctl2": { "value": "NC" },
-        "lora-txctl":          { "value": "NC" },
-        "lora-rxctl":          { "value": "NC" },
-        "lora-ant-switch":     { "value": "NC" },
-        "lora-pwr-amp-ctl":    { "value": "NC" },
-        "lora-tcxo":           { "value": "NC" },
-        "battery-enabled":     { "value": "false" },
-        "battery-adc":         { "value": "NC" },
-        "dht-enabled":         { "value": "false" },
-        "dht-type":            { "value": "DHT::DHT22" },
-        "dht-data":            { "value": "NC" },
-        "hx711-enabled":       { "value": "false" },
-        "hx711-clk":           { "value": "NC" },
-        "hx711-data":          { "value": "NC" },
-        "hx711-scale":         { "value": "1.0f" },
-        "hx711-offset":        { "value": 0 }
-    },
-    "target_overrides": {
-        "*": {
-            "platform.stdio-convert-newlines": true,
-            "platform.stdio-baud-rate": 115200,
-            "platform.default-serial-baud-rate": 115200,
-            "lora.app-port": 3,
-            "lora.over-the-air-activation": true,
-            "lora.duty-cycle-on": false,
-            "lora.phy": 0,
-            "lora.device-eui": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }",
-            "lora.application-eui": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }",
-            "lora.application-key": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }"
-        },
-
-        "K64F": {
-            "lora-spi-mosi":       "D11",
-            "lora-spi-miso":       "D12",
-            "lora-spi-sclk":       "D13",
-            "lora-cs":             "D10",
-            "lora-reset":          "A0",
-            "lora-dio0":           "D2",
-            "lora-dio1":           "D3",
-            "lora-dio2":           "D4",
-            "lora-dio3":           "D5",
-            "lora-dio4":           "D8",
-            "lora-dio5":           "D9",
-            "lora-rf-switch-ctl1": "NC",
-            "lora-rf-switch-ctl2": "NC",
-            "lora-txctl":          "NC",
-            "lora-rxctl":          "NC",
-            "lora-ant-switch":     "A4",
-            "lora-pwr-amp-ctl":    "NC",
-            "lora-tcxo":           "NC"
-        },
-
-        "DISCO_L072CZ_LRWAN1": {
-            "main_stack_size":      3072,
-
-            "lora-radio":          "SX1276",
-            "lora-spi-mosi":       "PA_7",
-            "lora-spi-miso":       "PA_6",
-            "lora-spi-sclk":       "PB_3",
-            "lora-cs":             "PA_15",
-            "lora-reset":          "PC_0",
-            "lora-dio0":           "PB_4",
-            "lora-dio1":           "PB_1",
-            "lora-dio2":           "PB_0",
-            "lora-dio3":           "PC_13",
-            "lora-dio4":           "NC",
-            "lora-dio5":           "NC",
-            "lora-rf-switch-ctl1": "NC",
-            "lora-rf-switch-ctl2": "NC",
-            "lora-txctl":          "PC_2",
-            "lora-rxctl":          "PA_1",
-            "lora-ant-switch":     "NC",
-            "lora-pwr-amp-ctl":    "PC_1",
-            "lora-tcxo":           "PA_12"
-        },
-
-        "MTB_MURATA_ABZ": {
-            "lora-radio":          "SX1276",
-            "lora-spi-mosi":       "PA_7",
-            "lora-spi-miso":       "PA_6",
-            "lora-spi-sclk":       "PB_3",
-            "lora-cs":             "PA_15",
-            "lora-reset":          "PC_0",
-            "lora-dio0":           "PB_4",
-            "lora-dio1":           "PB_1",
-            "lora-dio2":           "PB_0",
-            "lora-dio3":           "PC_13",
-            "lora-dio4":           "NC",
-            "lora-dio5":           "NC",
-            "lora-rf-switch-ctl1": "NC",
-            "lora-rf-switch-ctl2": "NC",
-            "lora-txctl":          "PC_2",
-            "lora-rxctl":          "PA_1",
-            "lora-ant-switch":     "NC",
-            "lora-pwr-amp-ctl":    "PC_1",
-            "lora-tcxo":           "PA_12"
-        },
-
-        "XDOT_L151CC": {
-            "lora-radio":           "SX1272",
-            "lora-spi-mosi":        "LORA_MOSI",
-            "lora-spi-miso":        "LORA_MISO",
-            "lora-spi-sclk":        "LORA_SCK",
-            "lora-cs":              "LORA_NSS",
-            "lora-reset":           "LORA_RESET",
-            "lora-dio0":            "LORA_DIO0",
-            "lora-dio1":            "LORA_DIO1",
-            "lora-dio2":            "LORA_DIO2",
-            "lora-dio3":            "LORA_DIO3",
-            "lora-dio4":            "LORA_DIO4",
-            "lora-dio5":            "NC",
-            "lora-rf-switch-ctl1":  "NC",
-            "lora-rf-switch-ctl2":  "NC",
-            "lora-txctl":           "NC",
-            "lora-rxctl":           "NC",
-            "lora-ant-switch":      "NC",
-            "lora-pwr-amp-ctl":     "NC",
-            "lora-tcxo":            "NC"
-        },
-
-        "MTB_MTS_XDOT": {
-            "lora-radio":           "SX1272",
-            "lora-spi-mosi":        "LORA_MOSI",
-            "lora-spi-miso":        "LORA_MISO",
-            "lora-spi-sclk":        "LORA_SCK",
-            "lora-cs":              "LORA_NSS",
-            "lora-reset":           "LORA_RESET",
-            "lora-dio0":            "LORA_DIO0",
-            "lora-dio1":            "LORA_DIO1",
-            "lora-dio2":            "LORA_DIO2",
-            "lora-dio3":            "LORA_DIO3",
-            "lora-dio4":            "LORA_DIO4",
-            "lora-dio5":            "NC",
-            "lora-rf-switch-ctl1":  "NC",
-            "lora-rf-switch-ctl2":  "NC",
-            "lora-txctl":           "NC",
-            "lora-rxctl":           "NC",
-            "lora-ant-switch":      "NC",
-            "lora-pwr-amp-ctl":     "NC",
-            "lora-tcxo":            "NC"
-        },
-
-        "LTEK_FF1705": {
-            "lora-radio":           "SX1272",
-            "lora-spi-mosi":        "LORA_MOSI",
-            "lora-spi-miso":        "LORA_MISO",
-            "lora-spi-sclk":        "LORA_SCK",
-            "lora-cs":              "LORA_NSS",
-            "lora-reset":           "LORA_RESET",
-            "lora-dio0":            "LORA_DIO0",
-            "lora-dio1":            "LORA_DIO1",
-            "lora-dio2":            "LORA_DIO2",
-            "lora-dio3":            "LORA_DIO3",
-            "lora-dio4":            "LORA_DIO4",
-            "lora-dio5":            "NC",
-            "lora-rf-switch-ctl1":  "NC",
-            "lora-rf-switch-ctl2":  "NC",
-            "lora-txctl":           "NC",
-            "lora-rxctl":           "NC",
-            "lora-ant-switch":      "NC",
-            "lora-pwr-amp-ctl":     "NC",
-            "lora-tcxo":            "NC"
-        },
-
-        "MTS_MDOT_F411RE": {
-            "lora-radio":           "SX1272",
-            "lora-spi-mosi":        "LORA_MOSI",
-            "lora-spi-miso":        "LORA_MISO",
-            "lora-spi-sclk":        "LORA_SCK",
-            "lora-cs":              "LORA_NSS",
-            "lora-reset":           "LORA_RESET",
-            "lora-dio0":            "LORA_DIO0",
-            "lora-dio1":            "LORA_DIO1",
-            "lora-dio2":            "LORA_DIO2",
-            "lora-dio3":            "LORA_DIO3",
-            "lora-dio4":            "LORA_DIO4",
-            "lora-dio5":            "LORA_DIO5",
-            "lora-rf-switch-ctl1":  "NC",
-            "lora-rf-switch-ctl2":  "NC",
-            "lora-txctl":           "LORA_TXCTL",
-            "lora-rxctl":           "LORA_RXCTL",
-            "lora-ant-switch":      "NC",
-            "lora-pwr-amp-ctl":     "NC",
-            "lora-tcxo":            "NC"
-        },
-
-        "MTB_ADV_WISE_1510": {
-            "lora-radio":           "SX1276",
-            "lora-spi-mosi":        "SPI_RF_MOSI",
-            "lora-spi-miso":        "SPI_RF_MISO",
-            "lora-spi-sclk":        "SPI_RF_SCK",
-            "lora-cs":              "SPI_RF_CS",
-            "lora-reset":           "SPI_RF_RESET",
-            "lora-dio0":            "DIO0",
-            "lora-dio1":            "DIO1",
-            "lora-dio2":            "DIO2",
-            "lora-dio3":            "DIO3",
-            "lora-dio4":            "DIO4",
-            "lora-dio5":            "DIO5",
-            "lora-rf-switch-ctl1":  "NC",
-            "lora-rf-switch-ctl2":  "NC",
-            "lora-txctl":           "NC",
-            "lora-rxctl":           "NC",
-            "lora-ant-switch":      "ANT_SWITCH",
-            "lora-pwr-amp-ctl":     "NC",
-            "lora-tcxo":            "NC"
-        },
-
-        "MTB_RAK811": {
-            "lora-radio":          "SX1276",
-            "lora-spi-mosi":       "SPI_RF_MOSI",
-            "lora-spi-miso":       "SPI_RF_MISO",
-            "lora-spi-sclk":       "SPI_RF_SCK",
-            "lora-cs":             "SPI_RF_CS",
-            "lora-reset":          "SPI_RF_RESET",
-            "lora-dio0":           "DIO0",
-            "lora-dio1":           "DIO1",
-            "lora-dio2":           "DIO2",
-            "lora-dio3":           "DIO3",
-            "lora-dio4":           "DIO4",
-            "lora-dio5":           "NC",
-            "lora-rf-switch-ctl1": "NC",
-            "lora-rf-switch-ctl2": "NC",
-            "lora-txctl":          "ANT_CTX_PA",
-            "lora-rxctl":          "ANT_CRX_RX",
-            "lora-ant-switch":     "NC",
-            "lora-pwr-amp-ctl":    "NC",
-            "lora-tcxo":           "RF_TCXO_EN",
-            "battery-enabled":     true,
-            "battery-adc":         "PA_2",
-            "dht-enabled":         true,
-            "dht-data":            "PA_1",
-            "dht-type":            "DHT::DHT22"
-        },
-
-        "NUCLEO_L073RZ": {
-            "main_stack_size":      1024,
-            "target.lpticker_lptim": 0,
-            "target.clock_source": "USE_PLL_HSI",
-            "target.stdio_uart_tx": "PC_10",
-            "target.stdio_uart_rx": "PC_11",
-            "lora-radio":          "SX1272",
-            "lora-spi-mosi":       "D11",
-            "lora-spi-miso":       "D12",
-            "lora-spi-sclk":       "D13",
-            "lora-cs":             "D10",
-            "lora-reset":          "A0",
-            "lora-dio0":           "D2",
-            "lora-dio1":           "D3",
-            "lora-dio2":           "D4",
-            "lora-dio3":           "D5",
-            "lora-dio4":           "NC",
-            "lora-dio5":           "NC",
-            "lora-rf-switch-ctl1": "NC",
-            "lora-rf-switch-ctl2": "NC",
-            "lora-txctl":          "NC",
-            "lora-rxctl":          "NC",
-            "lora-ant-switch":     "A4",
-            "lora-pwr-amp-ctl":    "NC",
-            "lora-tcxo":           "NC",
-            "battery-enabled":     false,
-            "battery-adc":         "PA_2",
-            "dht-enabled":         true,
-            "dht-data":            "D8",
-            "dht-type":            "DHT::DHT22",
-            "hx711-enabled":       true,
-            "hx711-clk":           "D7",
-            "hx711-data":          "D6",
-            "hx711-scale":         "21000.0f",
-            "hx711-offset":        -2000
-        }
-    },
-    "macros": ["MBEDTLS_USER_CONFIG_FILE=\"mbedtls_lora_config.h\""]
-}

minimal-printf.lib

@@ -1 +0,0 @@
-https://github.com/ARMmbed/minimal-printf/#7a57a3e36a227a3e412cec55b0eeaf649b9fa7c9

profiles/release.json

@@ -0,0 +1,56 @@
+{
+    "GCC_ARM": {
+        "common": ["-c", "-Wall", "-Wextra",
+                   "-Wno-unused-parameter", "-Wno-missing-field-initializers",
+                   "-fmessage-length=0", "-fno-exceptions", "-fno-builtin",
+                   "-ffunction-sections", "-fdata-sections", "-funsigned-char",
+                   "-MMD", "-fno-delete-null-pointer-checks",
+                   "-fomit-frame-pointer", "-Os", "-DNDEBUG", "-g1"],
+        "asm": ["-x", "assembler-with-cpp"],
+        "c": ["-std=gnu99"],
+        "cxx": ["-std=gnu++98", "-fno-rtti", "-Wvla"],
+        "ld": ["-Wl,--gc-sections", "-Wl,--wrap,main", "-Wl,--wrap,_malloc_r",
+               "-Wl,--wrap,_free_r", "-Wl,--wrap,_realloc_r", "-Wl,--wrap,_memalign_r",
+               "-Wl,--wrap,_calloc_r", "-Wl,--wrap,exit", "-Wl,--wrap,atexit",
+               "-Wl,-n", "--specs=nano.specs", "-u _printf_float"]
+    },
+    "ARMC6": {
+        "common": ["-c", "--target=arm-arm-none-eabi", "-mthumb", "-Oz",
+                   "-Wno-armcc-pragma-push-pop", "-Wno-armcc-pragma-anon-unions",
+                   "-DMULADDC_CANNOT_USE_R7", "-fdata-sections",
+                   "-fno-exceptions", "-MMD", "-D_LIBCPP_EXTERN_TEMPLATE(...)=",
+                   "-fshort-enums", "-fshort-wchar"],
+        "asm": [],
+        "c": ["-D__ASSERT_MSG", "-std=gnu99"],
+        "cxx": ["-fno-rtti", "-std=gnu++98"],
+        "ld": ["--show_full_path", "--legacyalign"]
+    },
+    "ARM": {
+        "common": ["-c", "--gnu", "-Ospace", "--split_sections",
+                   "--apcs=interwork", "--brief_diagnostics", "--restrict",
+                   "--multibyte_chars", "-O3", "-DNDEBUG"],
+        "asm": [],
+        "c": ["--md", "--no_depend_system_headers", "--c99", "-D__ASSERT_MSG"],
+        "cxx": ["--cpp", "--no_rtti", "--no_vla"],
+        "ld": ["--show_full_path"]
+    },
+    "uARM": {
+        "common": ["-c", "--gnu", "-Ospace", "--split_sections",
+                   "--apcs=interwork", "--brief_diagnostics", "--restrict",
+                   "--multibyte_chars", "-O3", "-D__MICROLIB",
+                   "--library_type=microlib", "-DMBED_RTOS_SINGLE_THREAD", "-DNDEBUG"],
+        "asm": [],
+        "c": ["--md", "--no_depend_system_headers", "--c99", "-D__ASSERT_MSG"],
+        "cxx": ["--cpp", "--no_rtti", "--no_vla"],
+        "ld": ["--library_type=microlib"]
+    },
+    "IAR": {
+        "common": [
+            "--no_wrap_diagnostics", "-e",
+            "--diag_suppress=Pa050,Pa084,Pa093,Pa082", "-Ohz", "-DNDEBUG", "--enable_restrict"],
+        "asm": [],
+        "c": ["--vla", "--diag_suppress=Pe546"],
+        "cxx": ["--guard_calls", "--no_static_destruction"],
+        "ld": ["--skip_dynamic_initialization", "--threaded_lib"]
+    }
+}

sensors/DHT.lib

@@ -1 +1 @@
-https://github.com/atoy40/mbed-dht/#0aa899f3a68e02eec69e74a6f68c35249530d89d
+https://github.com/atoy40/mbed-dht/#5e378f5eaf8d3ba88af711e035652d6277124a06

sensors/HX711.lib

@@ -1 +1 @@
-https://github.com/atoy40/mbed-hx711/#92640d4fcfc8f2128c3f3f54031cfafed5733bc8
+https://github.com/atoy40/mbed-hx711/#30e787849a54a53c0e055e21ad45d0f7b2c982b6