diff --git a/.clang-format b/.clang-format index 4d59658..49bfe1d 100644 --- a/.clang-format +++ b/.clang-format @@ -72,7 +72,7 @@ PenaltyExcessCharacter: 1000000 PenaltyReturnTypeOnItsOwnLine: 60 PointerAlignment: Left ReflowComments: true -SortIncludes: true +SortIncludes: false SpaceAfterCStyleCast: false SpaceAfterTemplateKeyword: false SpaceBeforeAssignmentOperators: true diff --git a/.mbedignore b/.mbedignore new file mode 100644 index 0000000..583f968 --- /dev/null +++ b/.mbedignore @@ -0,0 +1,8 @@ +mbed-os/features/netsocket/* +mbed-os/features/cellular/* +mbed-os/features/frameworks/greentea-client/* +mbed-os/features/frameworks/utest/* +mbed-os/features/frameworks/unity/* +mbed-os/features/nanostack/* +mbed-os/features/lwipstack/* +mbed-os/components/wifi/esp8266-driver/* \ No newline at end of file diff --git a/README.md b/README.md index a9bc43f..026bb14 100644 --- a/README.md +++ b/README.md @@ -36,3 +36,21 @@ From STlink CN4 Connector to RAK811 "shortest" connector (pin 1 at the same side 4 -> 4 (DATA) 5 -> 2 (RST) ``` + +### rewire STLink on a cutted Nucleo board + +From STlink CN4 Connector to Nucleo CN7 + +``` +2 -> 15 (CLK) +3 -> 19,20,22 (GND) +4 -> 13 (DATA) +5 -> 14 (RST) +``` + +From STLink CN3 Connector to Nucleo CN7 (stdio through USB) + +``` +rx -> 1 (USART4_TX) +tx -> 2 (USART4_RX) +``` \ No newline at end of file diff --git a/lora_radio_helper.h b/lora_radio_helper.h index fd4073e..c1f1051 100644 --- a/lora_radio_helper.h +++ b/lora_radio_helper.h @@ -20,44 +20,56 @@ #ifndef APP_LORA_RADIO_HELPER_H_ #define APP_LORA_RADIO_HELPER_H_ -#if MBED_CONF_APP_LORAWAN_ENABLED - -#ifdef DEVICE_SPI - #include "SX1272_LoRaRadio.h" #include "SX1276_LoRaRadio.h" -#define SX1272 0xFF -#define SX1276 0xEE +#define SX1272 0xFF +#define SX1276 0xEE -#if(MBED_CONF_APP_LORA_RADIO == SX1272) +#if (MBED_CONF_APP_LORA_RADIO == SX1272) -SX1272_LoRaRadio radio(MBED_CONF_APP_LORA_SPI_MOSI, MBED_CONF_APP_LORA_SPI_MISO, - MBED_CONF_APP_LORA_SPI_SCLK, MBED_CONF_APP_LORA_CS, MBED_CONF_APP_LORA_RESET, - MBED_CONF_APP_LORA_DIO0, MBED_CONF_APP_LORA_DIO1, MBED_CONF_APP_LORA_DIO2, - MBED_CONF_APP_LORA_DIO3, MBED_CONF_APP_LORA_DIO4, MBED_CONF_APP_LORA_DIO5, - MBED_CONF_APP_LORA_RF_SWITCH_CTL1, MBED_CONF_APP_LORA_RF_SWITCH_CTL2, - MBED_CONF_APP_LORA_TXCTL, MBED_CONF_APP_LORA_RXCTL, - MBED_CONF_APP_LORA_ANT_SWITCH, MBED_CONF_APP_LORA_PWR_AMP_CTL, +SX1272_LoRaRadio radio(MBED_CONF_APP_LORA_SPI_MOSI, + MBED_CONF_APP_LORA_SPI_MISO, + MBED_CONF_APP_LORA_SPI_SCLK, + MBED_CONF_APP_LORA_CS, + MBED_CONF_APP_LORA_RESET, + MBED_CONF_APP_LORA_DIO0, + MBED_CONF_APP_LORA_DIO1, + MBED_CONF_APP_LORA_DIO2, + MBED_CONF_APP_LORA_DIO3, + MBED_CONF_APP_LORA_DIO4, + MBED_CONF_APP_LORA_DIO5, + MBED_CONF_APP_LORA_RF_SWITCH_CTL1, + MBED_CONF_APP_LORA_RF_SWITCH_CTL2, + MBED_CONF_APP_LORA_TXCTL, + MBED_CONF_APP_LORA_RXCTL, + MBED_CONF_APP_LORA_ANT_SWITCH, + MBED_CONF_APP_LORA_PWR_AMP_CTL, MBED_CONF_APP_LORA_TCXO); -#elif(MBED_CONF_APP_LORA_RADIO == SX1276) +#elif (MBED_CONF_APP_LORA_RADIO == SX1276) -SX1276_LoRaRadio radio(MBED_CONF_APP_LORA_SPI_MOSI, MBED_CONF_APP_LORA_SPI_MISO, - MBED_CONF_APP_LORA_SPI_SCLK, MBED_CONF_APP_LORA_CS, MBED_CONF_APP_LORA_RESET, - MBED_CONF_APP_LORA_DIO0, MBED_CONF_APP_LORA_DIO1, MBED_CONF_APP_LORA_DIO2, - MBED_CONF_APP_LORA_DIO3, MBED_CONF_APP_LORA_DIO4, MBED_CONF_APP_LORA_DIO5, - MBED_CONF_APP_LORA_RF_SWITCH_CTL1, MBED_CONF_APP_LORA_RF_SWITCH_CTL2, - MBED_CONF_APP_LORA_TXCTL, MBED_CONF_APP_LORA_RXCTL, - MBED_CONF_APP_LORA_ANT_SWITCH, MBED_CONF_APP_LORA_PWR_AMP_CTL, +SX1276_LoRaRadio radio(MBED_CONF_APP_LORA_SPI_MOSI, + MBED_CONF_APP_LORA_SPI_MISO, + MBED_CONF_APP_LORA_SPI_SCLK, + MBED_CONF_APP_LORA_CS, + MBED_CONF_APP_LORA_RESET, + MBED_CONF_APP_LORA_DIO0, + MBED_CONF_APP_LORA_DIO1, + MBED_CONF_APP_LORA_DIO2, + MBED_CONF_APP_LORA_DIO3, + MBED_CONF_APP_LORA_DIO4, + MBED_CONF_APP_LORA_DIO5, + MBED_CONF_APP_LORA_RF_SWITCH_CTL1, + MBED_CONF_APP_LORA_RF_SWITCH_CTL2, + MBED_CONF_APP_LORA_TXCTL, + MBED_CONF_APP_LORA_RXCTL, + MBED_CONF_APP_LORA_ANT_SWITCH, + MBED_CONF_APP_LORA_PWR_AMP_CTL, MBED_CONF_APP_LORA_TCXO); #else #error "Unknown LoRa radio specified (SX1272,SX1276 are valid)" #endif -#endif // DEVICE_SPI - -#endif // MBED_CONF_APP_LORAWAN_ENABLED - #endif /* APP_LORA_RADIO_HELPER_H_ */ \ No newline at end of file diff --git a/main.cpp b/main.cpp index 4d2d58a..32191c5 100644 --- a/main.cpp +++ b/main.cpp @@ -17,14 +17,14 @@ uint8_t rx_buffer[LORAMAC_PHY_MAXPAYLOAD]; * Sets up an application dependent transmission timer in ms. Used only when Duty Cycling is off for * testing */ -#define TX_TIMER 600000 +#define TX_TIMER 30000 //600000 /** * Maximum number of events for the event queue. * 16 is the safe number for the stack events, however, if application * also uses the queue for whatever purposes, this number should be increased.c */ -#define MAX_NUMBER_OF_EVENTS 16 +#define MAX_NUMBER_OF_EVENTS 10 /** * Maximum number of retries for CONFIRMED messages before giving up @@ -45,9 +45,10 @@ AnalogIn bat(MBED_CONF_APP_BATTERY_ADC); DHT dht(MBED_CONF_APP_DHT_DATA, MBED_CONF_APP_DHT_TYPE); #endif -DigitalOut led(LED1, 1); +//DigitalOut led(LED1, 1); int main(void) { + lorawan_status_t retcode; // Initialize LoRaWAN stack if(lorawan.initialize(&ev_queue) != LORAWAN_STATUS_OK) { @@ -76,7 +77,7 @@ int main(void) { printf("\r\n Adaptive data rate (ADR) - Enabled \r\n"); - led = 0; + //led = 0; retcode = lorawan.connect(); @@ -161,7 +162,7 @@ static void receive_message() { static void lora_event_handler(lorawan_event_t event) { switch(event) { case CONNECTED: - led = 1; + //led = 1; printf("\r\n Connection - Successful \r\n"); if(MBED_CONF_LORA_DUTY_CYCLE_ON) { send_message(); diff --git a/mbed-semtech-lora-rf-drivers.lib b/mbed-lora-radio-drv.lib similarity index 100% rename from mbed-semtech-lora-rf-drivers.lib rename to mbed-lora-radio-drv.lib diff --git a/mbed_app.json b/mbed_app.json index 15a7f44..04f46da 100644 --- a/mbed_app.json +++ b/mbed_app.json @@ -5,9 +5,6 @@ "value": "SX1276" }, "main_stack_size": { "value": 4096 }, - - "lorawan-enabled": { "value": false}, - "lora-spi-mosi": { "value": "NC" }, "lora-spi-miso": { "value": "NC" }, "lora-spi-sclk": { "value": "NC" }, @@ -26,28 +23,27 @@ "lora-ant-switch": { "value": "NC" }, "lora-pwr-amp-ctl": { "value": "NC" }, "lora-tcxo": { "value": "NC" }, - "battery-enabled": { "value": "false" }, "battery-adc": { "value": "NC" }, - "dht-enabled": { "value": "false" }, "dht-type": { "value": "DHT::DHT22" }, "dht-data": { "value": "NC" } }, "target_overrides": { "*": { + "platform.stdio-convert-newlines": true, + "platform.stdio-baud-rate": 115200, + "platform.default-serial-baud-rate": 115200, "lora.app-port": 3, "lora.over-the-air-activation": true, "lora.duty-cycle-on": false, "lora.phy": 0, - "lora.device-eui": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }", - "lora.application-eui": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }", - "lora.application-key": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }" + "lora.device-eui": "{ 0x00, 0xC0, 0xE1, 0xC8, 0x1E, 0xFE, 0xBA, 0xA7 }", + "lora.application-eui": "{ 0x70, 0xB3, 0xD5, 0x7E, 0xF0, 0x00, 0x40, 0x5D }", + "lora.application-key": "{ 0x15, 0x8A, 0x34, 0x3B, 0xCC, 0x3E, 0xDE, 0xEC, 0xD2, 0x93, 0x45, 0xB4, 0xD3, 0x64, 0xA4, 0x37 }" }, "K64F": { - "lorawan-enabled": true, - "lora-spi-mosi": "D11", "lora-spi-miso": "D12", "lora-spi-sclk": "D13", @@ -70,7 +66,6 @@ "DISCO_L072CZ_LRWAN1": { "main_stack_size": 3072, - "lorawan-enabled": true, "lora-radio": "SX1276", "lora-spi-mosi": "PA_7", @@ -94,8 +89,6 @@ }, "MTB_MURATA_ABZ": { - "lorawan-enabled": true, - "lora-radio": "SX1276", "lora-spi-mosi": "PA_7", "lora-spi-miso": "PA_6", @@ -118,8 +111,6 @@ }, "XDOT_L151CC": { - "lorawan-enabled": true, - "lora-radio": "SX1272", "lora-spi-mosi": "LORA_MOSI", "lora-spi-miso": "LORA_MISO", @@ -142,8 +133,6 @@ }, "MTB_MTS_XDOT": { - "lorawan-enabled": true, - "lora-radio": "SX1272", "lora-spi-mosi": "LORA_MOSI", "lora-spi-miso": "LORA_MISO", @@ -166,8 +155,6 @@ }, "LTEK_FF1705": { - "lorawan-enabled": true, - "lora-radio": "SX1272", "lora-spi-mosi": "LORA_MOSI", "lora-spi-miso": "LORA_MISO", @@ -190,8 +177,6 @@ }, "MTS_MDOT_F411RE": { - "lorawan-enabled": true, - "lora-radio": "SX1272", "lora-spi-mosi": "LORA_MOSI", "lora-spi-miso": "LORA_MISO", @@ -214,8 +199,6 @@ }, "MTB_ADV_WISE_1510": { - "lorawan-enabled": true, - "lora-radio": "SX1276", "lora-spi-mosi": "SPI_RF_MOSI", "lora-spi-miso": "SPI_RF_MISO", @@ -238,8 +221,6 @@ }, "MTB_RAK811": { - "lorawan-enabled": true, - "lora-radio": "SX1276", "lora-spi-mosi": "SPI_RF_MOSI", "lora-spi-miso": "SPI_RF_MISO", @@ -259,18 +240,19 @@ "lora-ant-switch": "NC", "lora-pwr-amp-ctl": "NC", "lora-tcxo": "RF_TCXO_EN", - "battery-enabled": true, "battery-adc": "PA_2", - "dht-enabled": true, "dht-data": "PA_1", "dht-type": "DHT::DHT22" }, "NUCLEO_L073RZ": { - "lorawan-enabled": true, - + "main_stack_size": 1024, + "target.lpticker_lptim": 0, + "target.clock_source": "USE_PLL_HSI", + "target.stdio_uart_tx": "PC_10", + "target.stdio_uart_rx": "PC_11", "lora-radio": "SX1272", "lora-spi-mosi": "D11", "lora-spi-miso": "D12", @@ -281,8 +263,8 @@ "lora-dio1": "D3", "lora-dio2": "D4", "lora-dio3": "D5", - "lora-dio4": "D8", - "lora-dio5": "D9", + "lora-dio4": "NC", + "lora-dio5": "NC", "lora-rf-switch-ctl1": "NC", "lora-rf-switch-ctl2": "NC", "lora-txctl": "NC", @@ -290,12 +272,10 @@ "lora-ant-switch": "A4", "lora-pwr-amp-ctl": "NC", "lora-tcxo": "NC", - "battery-enabled": false, "battery-adc": "PA_2", - "dht-enabled": true, - "dht-data": "PA_1", + "dht-data": "D8", "dht-type": "DHT::DHT22" } }, diff --git a/mbedtls_lora_config.h b/mbedtls_lora_config.h index 375494e..23177b7 100644 --- a/mbedtls_lora_config.h +++ b/mbedtls_lora_config.h @@ -1,2709 +1,43 @@ /** - * \file config.h + * Copyright (c) 2017, Arm Limited and affiliates. + * SPDX-License-Identifier: Apache-2.0 * - * \brief Configuration options (set of defines) + * Licensed under the Apache License, Version 2.0 (the "License"); + * you may not use this file except in compliance with the License. + * You may obtain a copy of the License at * - * This set of compile-time options may be used to enable - * or disable features selectively, and reduce the global - * memory footprint. + * http://www.apache.org/licenses/LICENSE-2.0 * - * Copyright (C) 2006-2015, ARM Limited, All Rights Reserved - * SPDX-License-Identifier: Apache-2.0 - * - * Licensed under the Apache License, Version 2.0 (the "License"); you may - * not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, WITHOUT - * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - * - * This file is part of mbed TLS (https://tls.mbed.org) + * Unless required by applicable law or agreed to in writing, software + * distributed under the License is distributed on an "AS IS" BASIS, + * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + * See the License for the specific language governing permissions and + * limitations under the License. */ #ifndef MBEDTLS_LORA_CONFIG_H #define MBEDTLS_LORA_CONFIG_H -/** - * \name SECTION: System support - * - * This section sets system specific settings. - * \{ - */ - -/** - * \def MBEDTLS_HAVE_ASM - * - * The compiler has support for asm(). - * - * Requires support for asm() in compiler. - * - * Used in: - * library/timing.c - * library/padlock.c - * include/mbedtls/bn_mul.h - * - * Comment to disable the use of assembly code. - */ -#define MBEDTLS_HAVE_ASM - -/** - * \def MBEDTLS_NO_UDBL_DIVISION - * - * The platform lacks support for double-width integer division (64-bit - * division on a 32-bit platform, 128-bit division on a 64-bit platform). - * - * Used in: - * include/mbedtls/bignum.h - * library/bignum.c - * - * The bignum code uses double-width division to speed up some operations. - * Double-width division is often implemented in software that needs to - * be linked with the program. The presence of a double-width integer - * type is usually detected automatically through preprocessor macros, - * but the automatic detection cannot know whether the code needs to - * and can be linked with an implementation of division for that type. - * By default division is assumed to be usable if the type is present. - * Uncomment this option to prevent the use of double-width division. - * - * Note that division for the native integer type is always required. - * Furthermore, a 64-bit type is always required even on a 32-bit - * platform, but it need not support multiplication or division. In some - * cases it is also desirable to disable some double-width operations. For - * example, if double-width division is implemented in software, disabling - * it can reduce code size in some embedded targets. - */ -//#define MBEDTLS_NO_UDBL_DIVISION - -/** - * \def MBEDTLS_HAVE_SSE2 - * - * CPU supports SSE2 instruction set. - * - * Uncomment if the CPU supports SSE2 (IA-32 specific). - */ -//#define MBEDTLS_HAVE_SSE2 - -/** - * \def MBEDTLS_HAVE_TIME - * - * System has time.h and time(). - * The time does not need to be correct, only time differences are used, - * by contrast with MBEDTLS_HAVE_TIME_DATE - * - * Defining MBEDTLS_HAVE_TIME allows you to specify MBEDTLS_PLATFORM_TIME_ALT, - * MBEDTLS_PLATFORM_TIME_MACRO, MBEDTLS_PLATFORM_TIME_TYPE_MACRO and - * MBEDTLS_PLATFORM_STD_TIME. - * - * Comment if your system does not support time functions - */ -//#define MBEDTLS_HAVE_TIME - -/** - * \def MBEDTLS_HAVE_TIME_DATE - * - * System has time.h and time(), gmtime() and the clock is correct. - * The time needs to be correct (not necesarily very accurate, but at least - * the date should be correct). This is used to verify the validity period of - * X.509 certificates. - * - * Comment if your system does not have a correct clock. - */ -//#define MBEDTLS_HAVE_TIME_DATE - -/** - * \def MBEDTLS_PLATFORM_MEMORY - * - * Enable the memory allocation layer. - * - * By default mbed TLS uses the system-provided calloc() and free(). - * This allows different allocators (self-implemented or provided) to be - * provided to the platform abstraction layer. - * - * Enabling MBEDTLS_PLATFORM_MEMORY without the - * MBEDTLS_PLATFORM_{FREE,CALLOC}_MACROs will provide - * "mbedtls_platform_set_calloc_free()" allowing you to set an alternative calloc() and - * free() function pointer at runtime. - * - * Enabling MBEDTLS_PLATFORM_MEMORY and specifying - * MBEDTLS_PLATFORM_{CALLOC,FREE}_MACROs will allow you to specify the - * alternate function at compile time. - * - * Requires: MBEDTLS_PLATFORM_C - * - * Enable this layer to allow use of alternative memory allocators. - */ -//#define MBEDTLS_PLATFORM_MEMORY - -/** - * \def MBEDTLS_PLATFORM_NO_STD_FUNCTIONS - * - * Do not assign standard functions in the platform layer (e.g. calloc() to - * MBEDTLS_PLATFORM_STD_CALLOC and printf() to MBEDTLS_PLATFORM_STD_PRINTF) - * - * This makes sure there are no linking errors on platforms that do not support - * these functions. You will HAVE to provide alternatives, either at runtime - * via the platform_set_xxx() functions or at compile time by setting - * the MBEDTLS_PLATFORM_STD_XXX defines, or enabling a - * MBEDTLS_PLATFORM_XXX_MACRO. - * - * Requires: MBEDTLS_PLATFORM_C - * - * Uncomment to prevent default assignment of standard functions in the - * platform layer. - */ -//#define MBEDTLS_PLATFORM_NO_STD_FUNCTIONS - -/** - * \def MBEDTLS_PLATFORM_EXIT_ALT - * - * MBEDTLS_PLATFORM_XXX_ALT: Uncomment a macro to let mbed TLS support the - * function in the platform abstraction layer. - * - * Example: In case you uncomment MBEDTLS_PLATFORM_PRINTF_ALT, mbed TLS will - * provide a function "mbedtls_platform_set_printf()" that allows you to set an - * alternative printf function pointer. - * - * All these define require MBEDTLS_PLATFORM_C to be defined! - * - * \note MBEDTLS_PLATFORM_SNPRINTF_ALT is required on Windows; - * it will be enabled automatically by check_config.h - * - * \warning MBEDTLS_PLATFORM_XXX_ALT cannot be defined at the same time as - * MBEDTLS_PLATFORM_XXX_MACRO! - * - * Requires: MBEDTLS_PLATFORM_TIME_ALT requires MBEDTLS_HAVE_TIME - * - * Uncomment a macro to enable alternate implementation of specific base - * platform function - */ -//#define MBEDTLS_PLATFORM_EXIT_ALT -//#define MBEDTLS_PLATFORM_TIME_ALT -//#define MBEDTLS_PLATFORM_FPRINTF_ALT -//#define MBEDTLS_PLATFORM_PRINTF_ALT -//#define MBEDTLS_PLATFORM_SNPRINTF_ALT -//#define MBEDTLS_PLATFORM_NV_SEED_ALT -//#define MBEDTLS_PLATFORM_SETUP_TEARDOWN_ALT - -/** - * \def MBEDTLS_DEPRECATED_WARNING - * - * Mark deprecated functions so that they generate a warning if used. - * Functions deprecated in one version will usually be removed in the next - * version. You can enable this to help you prepare the transition to a new - * major version by making sure your code is not using these functions. - * - * This only works with GCC and Clang. With other compilers, you may want to - * use MBEDTLS_DEPRECATED_REMOVED - * - * Uncomment to get warnings on using deprecated functions. - */ -//#define MBEDTLS_DEPRECATED_WARNING - -/** - * \def MBEDTLS_DEPRECATED_REMOVED - * - * Remove deprecated functions so that they generate an error if used. - * Functions deprecated in one version will usually be removed in the next - * version. You can enable this to help you prepare the transition to a new - * major version by making sure your code is not using these functions. - * - * Uncomment to get errors on using deprecated functions. - */ -//#define MBEDTLS_DEPRECATED_REMOVED - -/* \} name SECTION: System support */ - -/** - * \name SECTION: mbed TLS feature support - * - * This section sets support for features that are or are not needed - * within the modules that are enabled. - * \{ - */ - -/** - * \def MBEDTLS_TIMING_ALT - * - * Uncomment to provide your own alternate implementation for mbedtls_timing_hardclock(), - * mbedtls_timing_get_timer(), mbedtls_set_alarm(), mbedtls_set/get_delay() - * - * Only works if you have MBEDTLS_TIMING_C enabled. - * - * You will need to provide a header "timing_alt.h" and an implementation at - * compile time. - */ -//#define MBEDTLS_TIMING_ALT - -/** - * \def MBEDTLS_AES_ALT - * - * MBEDTLS__MODULE_NAME__ALT: Uncomment a macro to let mbed TLS use your - * alternate core implementation of a symmetric crypto, an arithmetic or hash - * module (e.g. platform specific assembly optimized implementations). Keep - * in mind that the function prototypes should remain the same. - * - * This replaces the whole module. If you only want to replace one of the - * functions, use one of the MBEDTLS__FUNCTION_NAME__ALT flags. - * - * Example: In case you uncomment MBEDTLS_AES_ALT, mbed TLS will no longer - * provide the "struct mbedtls_aes_context" definition and omit the base - * function declarations and implementations. "aes_alt.h" will be included from - * "aes.h" to include the new function definitions. - * - * Uncomment a macro to enable alternate implementation of the corresponding - * module. - */ -//#define MBEDTLS_AES_ALT -//#define MBEDTLS_ARC4_ALT -//#define MBEDTLS_BLOWFISH_ALT -//#define MBEDTLS_CAMELLIA_ALT -//#define MBEDTLS_DES_ALT -//#define MBEDTLS_XTEA_ALT -//#define MBEDTLS_MD2_ALT -//#define MBEDTLS_MD4_ALT -//#define MBEDTLS_MD5_ALT -//#define MBEDTLS_RIPEMD160_ALT -//#define MBEDTLS_SHA1_ALT -//#define MBEDTLS_SHA256_ALT -//#define MBEDTLS_SHA512_ALT /* - * When replacing the elliptic curve module, pleace consider, that it is - * implemented with two .c files: - * - ecp.c - * - ecp_curves.c - * You can replace them very much like all the other MBEDTLS__MODULE_NAME__ALT - * macros as described above. The only difference is that you have to make sure - * that you provide functionality for both .c files. - */ -//#define MBEDTLS_ECP_ALT - -/** - * \def MBEDTLS_MD2_PROCESS_ALT - * - * MBEDTLS__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use you - * alternate core implementation of symmetric crypto or hash function. Keep in - * mind that function prototypes should remain the same. - * - * This replaces only one function. The header file from mbed TLS is still - * used, in contrast to the MBEDTLS__MODULE_NAME__ALT flags. - * - * Example: In case you uncomment MBEDTLS_SHA256_PROCESS_ALT, mbed TLS will - * no longer provide the mbedtls_sha1_process() function, but it will still provide - * the other function (using your mbedtls_sha1_process() function) and the definition - * of mbedtls_sha1_context, so your implementation of mbedtls_sha1_process must be compatible - * with this definition. - * - * \note Because of a signature change, the core AES encryption and decryption routines are - * currently named mbedtls_aes_internal_encrypt and mbedtls_aes_internal_decrypt, - * respectively. When setting up alternative implementations, these functions should - * be overriden, but the wrapper functions mbedtls_aes_decrypt and mbedtls_aes_encrypt - * must stay untouched. - * - * \note If you use the AES_xxx_ALT macros, then is is recommended to also set - * MBEDTLS_AES_ROM_TABLES in order to help the linker garbage-collect the AES - * tables. - * - * Uncomment a macro to enable alternate implementation of the corresponding - * function. - */ -//#define MBEDTLS_MD2_PROCESS_ALT -//#define MBEDTLS_MD4_PROCESS_ALT -//#define MBEDTLS_MD5_PROCESS_ALT -//#define MBEDTLS_RIPEMD160_PROCESS_ALT -//#define MBEDTLS_SHA1_PROCESS_ALT -//#define MBEDTLS_SHA256_PROCESS_ALT -//#define MBEDTLS_SHA512_PROCESS_ALT -//#define MBEDTLS_DES_SETKEY_ALT -//#define MBEDTLS_DES_CRYPT_ECB_ALT -//#define MBEDTLS_DES3_CRYPT_ECB_ALT -//#define MBEDTLS_AES_SETKEY_ENC_ALT -//#define MBEDTLS_AES_SETKEY_DEC_ALT -//#define MBEDTLS_AES_ENCRYPT_ALT -//#define MBEDTLS_AES_DECRYPT_ALT - -/** - * \def MBEDTLS_ECP_INTERNAL_ALT - * - * Expose a part of the internal interface of the Elliptic Curve Point module. - * - * MBEDTLS_ECP__FUNCTION_NAME__ALT: Uncomment a macro to let mbed TLS use your - * alternative core implementation of elliptic curve arithmetic. Keep in mind - * that function prototypes should remain the same. - * - * This partially replaces one function. The header file from mbed TLS is still - * used, in contrast to the MBEDTLS_ECP_ALT flag. The original implementation - * is still present and it is used for group structures not supported by the - * alternative. - * - * Any of these options become available by defining MBEDTLS_ECP_INTERNAL_ALT - * and implementing the following functions: - * unsigned char mbedtls_internal_ecp_grp_capable( - * const mbedtls_ecp_group *grp ) - * int mbedtls_internal_ecp_init( const mbedtls_ecp_group *grp ) - * void mbedtls_internal_ecp_deinit( const mbedtls_ecp_group *grp ) - * The mbedtls_internal_ecp_grp_capable function should return 1 if the - * replacement functions implement arithmetic for the given group and 0 - * otherwise. - * The functions mbedtls_internal_ecp_init and mbedtls_internal_ecp_deinit are - * called before and after each point operation and provide an opportunity to - * implement optimized set up and tear down instructions. - * - * Example: In case you uncomment MBEDTLS_ECP_INTERNAL_ALT and - * MBEDTLS_ECP_DOUBLE_JAC_ALT, mbed TLS will still provide the ecp_double_jac - * function, but will use your mbedtls_internal_ecp_double_jac if the group is - * supported (your mbedtls_internal_ecp_grp_capable function returns 1 when - * receives it as an argument). If the group is not supported then the original - * implementation is used. The other functions and the definition of - * mbedtls_ecp_group and mbedtls_ecp_point will not change, so your - * implementation of mbedtls_internal_ecp_double_jac and - * mbedtls_internal_ecp_grp_capable must be compatible with this definition. - * - * Uncomment a macro to enable alternate implementation of the corresponding - * function. - */ -/* Required for all the functions in this section */ -//#define MBEDTLS_ECP_INTERNAL_ALT -/* Support for Weierstrass curves with Jacobi representation */ -//#define MBEDTLS_ECP_RANDOMIZE_JAC_ALT -//#define MBEDTLS_ECP_ADD_MIXED_ALT -//#define MBEDTLS_ECP_DOUBLE_JAC_ALT -//#define MBEDTLS_ECP_NORMALIZE_JAC_MANY_ALT -//#define MBEDTLS_ECP_NORMALIZE_JAC_ALT -/* Support for curves with Montgomery arithmetic */ -//#define MBEDTLS_ECP_DOUBLE_ADD_MXZ_ALT -//#define MBEDTLS_ECP_RANDOMIZE_MXZ_ALT -//#define MBEDTLS_ECP_NORMALIZE_MXZ_ALT - -/** - * \def MBEDTLS_TEST_NULL_ENTROPY - * - * Enables testing and use of mbed TLS without any configured entropy sources. - * This permits use of the library on platforms before an entropy source has - * been integrated (see for example the MBEDTLS_ENTROPY_HARDWARE_ALT or the - * MBEDTLS_ENTROPY_NV_SEED switches). - * - * WARNING! This switch MUST be disabled in production builds, and is suitable - * only for development. - * Enabling the switch negates any security provided by the library. - * - * Requires MBEDTLS_ENTROPY_C, MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES - * - */ -//#define MBEDTLS_TEST_NULL_ENTROPY - -/** - * \def MBEDTLS_ENTROPY_HARDWARE_ALT - * - * Uncomment this macro to let mbed TLS use your own implementation of a - * hardware entropy collector. - * - * Your function must be called \c mbedtls_hardware_poll(), have the same - * prototype as declared in entropy_poll.h, and accept NULL as first argument. - * - * Uncomment to use your own hardware entropy collector. - */ -//#define MBEDTLS_ENTROPY_HARDWARE_ALT - -/** - * \def MBEDTLS_AES_ROM_TABLES - * - * Store the AES tables in ROM. - * - * Uncomment this macro to store the AES tables in ROM. - */ -#define MBEDTLS_AES_ROM_TABLES - -/** - * \def MBEDTLS_CAMELLIA_SMALL_MEMORY - * - * Use less ROM for the Camellia implementation (saves about 768 bytes). - * - * Uncomment this macro to use less memory for Camellia. - */ -//#define MBEDTLS_CAMELLIA_SMALL_MEMORY - -/** - * \def MBEDTLS_CIPHER_MODE_CBC - * - * Enable Cipher Block Chaining mode (CBC) for symmetric ciphers. - */ -//#define MBEDTLS_CIPHER_MODE_CBC - -/** - * \def MBEDTLS_CIPHER_MODE_CFB - * - * Enable Cipher Feedback mode (CFB) for symmetric ciphers. - */ -//#define MBEDTLS_CIPHER_MODE_CFB - -/** - * \def MBEDTLS_CIPHER_MODE_CTR - * - * Enable Counter Block Cipher mode (CTR) for symmetric ciphers. - */ -//#define MBEDTLS_CIPHER_MODE_CTR - -/** - * \def MBEDTLS_CIPHER_NULL_CIPHER - * - * Enable NULL cipher. - * Warning: Only do so when you know what you are doing. This allows for - * encryption or channels without any security! - * - * Requires MBEDTLS_ENABLE_WEAK_CIPHERSUITES as well to enable - * the following ciphersuites: - * MBEDTLS_TLS_ECDH_ECDSA_WITH_NULL_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_NULL_SHA - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_NULL_SHA - * MBEDTLS_TLS_ECDHE_RSA_WITH_NULL_SHA - * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA384 - * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA256 - * MBEDTLS_TLS_ECDHE_PSK_WITH_NULL_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA256 - * MBEDTLS_TLS_DHE_PSK_WITH_NULL_SHA - * MBEDTLS_TLS_RSA_WITH_NULL_SHA256 - * MBEDTLS_TLS_RSA_WITH_NULL_SHA - * MBEDTLS_TLS_RSA_WITH_NULL_MD5 - * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_NULL_SHA - * MBEDTLS_TLS_PSK_WITH_NULL_SHA384 - * MBEDTLS_TLS_PSK_WITH_NULL_SHA256 - * MBEDTLS_TLS_PSK_WITH_NULL_SHA - * - * Uncomment this macro to enable the NULL cipher and ciphersuites - */ -//#define MBEDTLS_CIPHER_NULL_CIPHER - -/** - * \def MBEDTLS_CIPHER_PADDING_PKCS7 - * - * MBEDTLS_CIPHER_PADDING_XXX: Uncomment or comment macros to add support for - * specific padding modes in the cipher layer with cipher modes that support - * padding (e.g. CBC) - * - * If you disable all padding modes, only full blocks can be used with CBC. - * - * Enable padding modes in the cipher layer. - */ -//#define MBEDTLS_CIPHER_PADDING_PKCS7 -//#define MBEDTLS_CIPHER_PADDING_ONE_AND_ZEROS -//#define MBEDTLS_CIPHER_PADDING_ZEROS_AND_LEN -//#define MBEDTLS_CIPHER_PADDING_ZEROS - -/** - * \def MBEDTLS_ENABLE_WEAK_CIPHERSUITES - * - * Enable weak ciphersuites in SSL / TLS. - * Warning: Only do so when you know what you are doing. This allows for - * channels with virtually no security at all! - * - * This enables the following ciphersuites: - * MBEDTLS_TLS_RSA_WITH_DES_CBC_SHA - * MBEDTLS_TLS_DHE_RSA_WITH_DES_CBC_SHA - * - * Uncomment this macro to enable weak ciphersuites - */ -//#define MBEDTLS_ENABLE_WEAK_CIPHERSUITES - -/** - * \def MBEDTLS_REMOVE_ARC4_CIPHERSUITES - * - * Remove RC4 ciphersuites by default in SSL / TLS. - * This flag removes the ciphersuites based on RC4 from the default list as - * returned by mbedtls_ssl_list_ciphersuites(). However, it is still possible to - * enable (some of) them with mbedtls_ssl_conf_ciphersuites() by including them - * explicitly. - * - * Uncomment this macro to remove RC4 ciphersuites by default. - */ -//#define MBEDTLS_REMOVE_ARC4_CIPHERSUITES - -/** - * \def MBEDTLS_ECP_DP_SECP192R1_ENABLED - * - * MBEDTLS_ECP_XXXX_ENABLED: Enables specific curves within the Elliptic Curve - * module. By default all supported curves are enabled. - * - * Comment macros to disable the curve and functions for it - */ -//#define MBEDTLS_ECP_DP_SECP192R1_ENABLED -//#define MBEDTLS_ECP_DP_SECP224R1_ENABLED -//#define MBEDTLS_ECP_DP_SECP256R1_ENABLED -//#define MBEDTLS_ECP_DP_SECP384R1_ENABLED -//#define MBEDTLS_ECP_DP_SECP521R1_ENABLED -//#define MBEDTLS_ECP_DP_SECP192K1_ENABLED -//#define MBEDTLS_ECP_DP_SECP224K1_ENABLED -//#define MBEDTLS_ECP_DP_SECP256K1_ENABLED -//#define MBEDTLS_ECP_DP_BP256R1_ENABLED -//#define MBEDTLS_ECP_DP_BP384R1_ENABLED -//#define MBEDTLS_ECP_DP_BP512R1_ENABLED -//#define MBEDTLS_ECP_DP_CURVE25519_ENABLED - -/** - * \def MBEDTLS_ECP_NIST_OPTIM - * - * Enable specific 'modulo p' routines for each NIST prime. - * Depending on the prime and architecture, makes operations 4 to 8 times - * faster on the corresponding curve. - * - * Comment this macro to disable NIST curves optimisation. - */ -//#define MBEDTLS_ECP_NIST_OPTIM - -/** - * \def MBEDTLS_ECDSA_DETERMINISTIC - * - * Enable deterministic ECDSA (RFC 6979). - * Standard ECDSA is "fragile" in the sense that lack of entropy when signing - * may result in a compromise of the long-term signing key. This is avoided by - * the deterministic variant. - * - * Requires: MBEDTLS_HMAC_DRBG_C - * - * Comment this macro to disable deterministic ECDSA. - */ -//#define MBEDTLS_ECDSA_DETERMINISTIC - -/** - * \def MBEDTLS_KEY_EXCHANGE_PSK_ENABLED - * - * Enable the PSK based ciphersuite modes in SSL / TLS. - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_PSK_WITH_RC4_128_SHA - */ -//#define MBEDTLS_KEY_EXCHANGE_PSK_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED + * Configure mbedtls for LoRa stack. * - * Enable the DHE-PSK based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_DHM_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA - */ -//#define MBEDTLS_KEY_EXCHANGE_DHE_PSK_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED - * - * Enable the ECDHE-PSK based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_ECDH_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA - */ -//#define MBEDTLS_KEY_EXCHANGE_ECDHE_PSK_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED - * - * Enable the RSA-PSK based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, - * MBEDTLS_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA - */ -//#define MBEDTLS_KEY_EXCHANGE_RSA_PSK_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_RSA_ENABLED - * - * Enable the RSA-only based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, - * MBEDTLS_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_RC4_128_SHA - * MBEDTLS_TLS_RSA_WITH_RC4_128_MD5 - */ -//#define MBEDTLS_KEY_EXCHANGE_RSA_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED - * - * Enable the DHE-RSA based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_DHM_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, - * MBEDTLS_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA - * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA - * MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA - */ -//#define MBEDTLS_KEY_EXCHANGE_DHE_RSA_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED - * - * Enable the ECDHE-RSA based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_ECDH_C, MBEDTLS_RSA_C, MBEDTLS_PKCS1_V15, - * MBEDTLS_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA + * These settings are just a customization of the main mbedtls config + * mbed-os/features/mbedtls/inc/mbedtls/config.h */ -//#define MBEDTLS_KEY_EXCHANGE_ECDHE_RSA_ENABLED -/** - * \def MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED - * - * Enable the ECDHE-ECDSA based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_ECDH_C, MBEDTLS_ECDSA_C, MBEDTLS_X509_CRT_PARSE_C, - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA - */ -//#define MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED - * - * Enable the ECDH-ECDSA based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA - * MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 - */ -//#define MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED - * - * Enable the ECDH-RSA based ciphersuite modes in SSL / TLS. - * - * Requires: MBEDTLS_ECDH_C, MBEDTLS_X509_CRT_PARSE_C - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 - */ -//#define MBEDTLS_KEY_EXCHANGE_ECDH_RSA_ENABLED - -/** - * \def MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED - * - * Enable the ECJPAKE based ciphersuite modes in SSL / TLS. - * - * \warning This is currently experimental. EC J-PAKE support is based on the - * Thread v1.0.0 specification; incompatible changes to the specification - * might still happen. For this reason, this is disabled by default. - * - * Requires: MBEDTLS_ECJPAKE_C - * MBEDTLS_SHA256_C - * MBEDTLS_ECP_DP_SECP256R1_ENABLED - * - * This enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECJPAKE_WITH_AES_128_CCM_8 - */ -//#define MBEDTLS_KEY_EXCHANGE_ECJPAKE_ENABLED +// Ensure LoRa required ciphers are enabled +#define MBEDTLS_CIPHER_C +#define MBEDTLS_AES_C +#define MBEDTLS_CMAC_C -/** - * \def MBEDTLS_PK_PARSE_EC_EXTENDED - * - * Enhance support for reading EC keys using variants of SEC1 not allowed by - * RFC 5915 and RFC 5480. - * - * Currently this means parsing the SpecifiedECDomain choice of EC - * parameters (only known groups are supported, not arbitrary domains, to - * avoid validation issues). - * - * Disable if you only need to support RFC 5915 + 5480 key formats. - */ -//#define MBEDTLS_PK_PARSE_EC_EXTENDED - -/** - * \def MBEDTLS_ERROR_STRERROR_DUMMY - * - * Enable a dummy error function to make use of mbedtls_strerror() in - * third party libraries easier when MBEDTLS_ERROR_C is disabled - * (no effect when MBEDTLS_ERROR_C is enabled). - * - * You can safely disable this if MBEDTLS_ERROR_C is enabled, or if you're - * not using mbedtls_strerror() or error_strerror() in your application. - * - * Disable if you run into name conflicts and want to really remove the - * mbedtls_strerror() - */ -//#define MBEDTLS_ERROR_STRERROR_DUMMY - -/** - * \def MBEDTLS_GENPRIME - * - * Enable the prime-number generation code. - * - * Requires: MBEDTLS_BIGNUM_C - */ -//#define MBEDTLS_GENPRIME - -/** - * \def MBEDTLS_FS_IO - * - * Enable functions that use the filesystem. - */ -//#define MBEDTLS_FS_IO - -/** - * \def MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES - * - * Do not add default entropy sources. These are the platform specific, - * mbedtls_timing_hardclock and HAVEGE based poll functions. - * - * This is useful to have more control over the added entropy sources in an - * application. - * - * Uncomment this macro to prevent loading of default entropy functions. - */ -//#define MBEDTLS_NO_DEFAULT_ENTROPY_SOURCES - -/** - * \def MBEDTLS_NO_PLATFORM_ENTROPY - * - * Do not use built-in platform entropy functions. - * This is useful if your platform does not support - * standards like the /dev/urandom or Windows CryptoAPI. - * - * Uncomment this macro to disable the built-in platform entropy functions. - */ -#define MBEDTLS_NO_PLATFORM_ENTROPY - -/** - * \def MBEDTLS_ENTROPY_FORCE_SHA256 - * - * Force the entropy accumulator to use a SHA-256 accumulator instead of the - * default SHA-512 based one (if both are available). - * - * Requires: MBEDTLS_SHA256_C - * - * On 32-bit systems SHA-256 can be much faster than SHA-512. Use this option - * if you have performance concerns. - * - * This option is only useful if both MBEDTLS_SHA256_C and - * MBEDTLS_SHA512_C are defined. Otherwise the available hash module is used. - */ -//#define MBEDTLS_ENTROPY_FORCE_SHA256 - -/** - * \def MBEDTLS_ENTROPY_NV_SEED - * - * Enable the non-volatile (NV) seed file-based entropy source. - * (Also enables the NV seed read/write functions in the platform layer) - * - * This is crucial (if not required) on systems that do not have a - * cryptographic entropy source (in hardware or kernel) available. - * - * Requires: MBEDTLS_ENTROPY_C, MBEDTLS_PLATFORM_C - * - * \note The read/write functions that are used by the entropy source are - * determined in the platform layer, and can be modified at runtime and/or - * compile-time depending on the flags (MBEDTLS_PLATFORM_NV_SEED_*) used. - * - * \note If you use the default implementation functions that read a seedfile - * with regular fopen(), please make sure you make a seedfile with the - * proper name (defined in MBEDTLS_PLATFORM_STD_NV_SEED_FILE) and at - * least MBEDTLS_ENTROPY_BLOCK_SIZE bytes in size that can be read from - * and written to or you will get an entropy source error! The default - * implementation will only use the first MBEDTLS_ENTROPY_BLOCK_SIZE - * bytes from the file. - * - * \note The entropy collector will write to the seed file before entropy is - * given to an external source, to update it. - */ -//#define MBEDTLS_ENTROPY_NV_SEED - -/** - * \def MBEDTLS_MEMORY_DEBUG - * - * Enable debugging of buffer allocator memory issues. Automatically prints - * (to stderr) all (fatal) messages on memory allocation issues. Enables - * function for 'debug output' of allocated memory. - * - * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C - * - * Uncomment this macro to let the buffer allocator print out error messages. - */ -//#define MBEDTLS_MEMORY_DEBUG - -/** - * \def MBEDTLS_MEMORY_BACKTRACE - * - * Include backtrace information with each allocated block. - * - * Requires: MBEDTLS_MEMORY_BUFFER_ALLOC_C - * GLIBC-compatible backtrace() an backtrace_symbols() support - * - * Uncomment this macro to include backtrace information - */ -//#define MBEDTLS_MEMORY_BACKTRACE - -/** - * \def MBEDTLS_PK_RSA_ALT_SUPPORT - * - * Support external private RSA keys (eg from a HSM) in the PK layer. - * - * Comment this macro to disable support for external private RSA keys. - */ -//#define MBEDTLS_PK_RSA_ALT_SUPPORT - -/** - * \def MBEDTLS_PKCS1_V15 - * - * Enable support for PKCS#1 v1.5 encoding. - * - * Requires: MBEDTLS_RSA_C - * - * This enables support for PKCS#1 v1.5 operations. - */ -//#define MBEDTLS_PKCS1_V15 - -/** - * \def MBEDTLS_PKCS1_V21 - * - * Enable support for PKCS#1 v2.1 encoding. - * - * Requires: MBEDTLS_MD_C, MBEDTLS_RSA_C - * - * This enables support for RSAES-OAEP and RSASSA-PSS operations. - */ -//#define MBEDTLS_PKCS1_V21 - -/** - * \def MBEDTLS_RSA_NO_CRT - * - * Do not use the Chinese Remainder Theorem for the RSA private operation. - * - * Uncomment this macro to disable the use of CRT in RSA. - * - */ -//#define MBEDTLS_RSA_NO_CRT - -/** - * \def MBEDTLS_SELF_TEST - * - * Enable the checkup functions (*_self_test). - */ -//#define MBEDTLS_SELF_TEST - -/** - * \def MBEDTLS_SHA256_SMALLER - * - * Enable an implementation of SHA-256 that has lower ROM footprint but also - * lower performance. - * - * The default implementation is meant to be a reasonnable compromise between - * performance and size. This version optimizes more aggressively for size at - * the expense of performance. Eg on Cortex-M4 it reduces the size of - * mbedtls_sha256_process() from ~2KB to ~0.5KB for a performance hit of about - * 30%. - * - * Uncomment to enable the smaller implementation of SHA256. - */ -//#define MBEDTLS_SHA256_SMALLER - -/** - * \def MBEDTLS_SSL_ALL_ALERT_MESSAGES - * - * Enable sending of alert messages in case of encountered errors as per RFC. - * If you choose not to send the alert messages, mbed TLS can still communicate - * with other servers, only debugging of failures is harder. - * - * The advantage of not sending alert messages, is that no information is given - * about reasons for failures thus preventing adversaries of gaining intel. - * - * Enable sending of all alert messages - */ -//#define MBEDTLS_SSL_ALL_ALERT_MESSAGES - -/** - * \def MBEDTLS_SSL_DEBUG_ALL - * - * Enable the debug messages in SSL module for all issues. - * Debug messages have been disabled in some places to prevent timing - * attacks due to (unbalanced) debugging function calls. - * - * If you need all error reporting you should enable this during debugging, - * but remove this for production servers that should log as well. - * - * Uncomment this macro to report all debug messages on errors introducing - * a timing side-channel. - * - */ -//#define MBEDTLS_SSL_DEBUG_ALL - -/** \def MBEDTLS_SSL_ENCRYPT_THEN_MAC - * - * Enable support for Encrypt-then-MAC, RFC 7366. - * - * This allows peers that both support it to use a more robust protection for - * ciphersuites using CBC, providing deep resistance against timing attacks - * on the padding or underlying cipher. - * - * This only affects CBC ciphersuites, and is useless if none is defined. - * - * Requires: MBEDTLS_SSL_PROTO_TLS1 or - * MBEDTLS_SSL_PROTO_TLS1_1 or - * MBEDTLS_SSL_PROTO_TLS1_2 - * - * Comment this macro to disable support for Encrypt-then-MAC - */ -//#define MBEDTLS_SSL_ENCRYPT_THEN_MAC - -/** \def MBEDTLS_SSL_EXTENDED_MASTER_SECRET - * - * Enable support for Extended Master Secret, aka Session Hash - * (draft-ietf-tls-session-hash-02). - * - * This was introduced as "the proper fix" to the Triple Handshake familiy of - * attacks, but it is recommended to always use it (even if you disable - * renegotiation), since it actually fixes a more fundamental issue in the - * original SSL/TLS design, and has implications beyond Triple Handshake. - * - * Requires: MBEDTLS_SSL_PROTO_TLS1 or - * MBEDTLS_SSL_PROTO_TLS1_1 or - * MBEDTLS_SSL_PROTO_TLS1_2 - * - * Comment this macro to disable support for Extended Master Secret. - */ -//#define MBEDTLS_SSL_EXTENDED_MASTER_SECRET - -/** - * \def MBEDTLS_SSL_FALLBACK_SCSV - * - * Enable support for FALLBACK_SCSV (draft-ietf-tls-downgrade-scsv-00). - * - * For servers, it is recommended to always enable this, unless you support - * only one version of TLS, or know for sure that none of your clients - * implements a fallback strategy. - * - * For clients, you only need this if you're using a fallback strategy, which - * is not recommended in the first place, unless you absolutely need it to - * interoperate with buggy (version-intolerant) servers. - * - * Comment this macro to disable support for FALLBACK_SCSV - */ -//#define MBEDTLS_SSL_FALLBACK_SCSV - -/** - * \def MBEDTLS_SSL_HW_RECORD_ACCEL - * - * Enable hooking functions in SSL module for hardware acceleration of - * individual records. - * - * Uncomment this macro to enable hooking functions. - */ -//#define MBEDTLS_SSL_HW_RECORD_ACCEL - -/** - * \def MBEDTLS_SSL_CBC_RECORD_SPLITTING - * - * Enable 1/n-1 record splitting for CBC mode in SSLv3 and TLS 1.0. - * - * This is a countermeasure to the BEAST attack, which also minimizes the risk - * of interoperability issues compared to sending 0-length records. - * - * Comment this macro to disable 1/n-1 record splitting. - */ -//#define MBEDTLS_SSL_CBC_RECORD_SPLITTING - -/** - * \def MBEDTLS_SSL_RENEGOTIATION - * - * Disable support for TLS renegotiation. - * - * The two main uses of renegotiation are (1) refresh keys on long-lived - * connections and (2) client authentication after the initial handshake. - * If you don't need renegotiation, it's probably better to disable it, since - * it has been associated with security issues in the past and is easy to - * misuse/misunderstand. - * - * Comment this to disable support for renegotiation. - */ -//#define MBEDTLS_SSL_RENEGOTIATION - -/** - * \def MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO - * - * Enable support for receiving and parsing SSLv2 Client Hello messages for the - * SSL Server module (MBEDTLS_SSL_SRV_C). - * - * Uncomment this macro to enable support for SSLv2 Client Hello messages. - */ -//#define MBEDTLS_SSL_SRV_SUPPORT_SSLV2_CLIENT_HELLO - -/** - * \def MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE - * - * Pick the ciphersuite according to the client's preferences rather than ours - * in the SSL Server module (MBEDTLS_SSL_SRV_C). - * - * Uncomment this macro to respect client's ciphersuite order - */ -//#define MBEDTLS_SSL_SRV_RESPECT_CLIENT_PREFERENCE - -/** - * \def MBEDTLS_SSL_MAX_FRAGMENT_LENGTH - * - * Enable support for RFC 6066 max_fragment_length extension in SSL. - * - * Comment this macro to disable support for the max_fragment_length extension - */ -//#define MBEDTLS_SSL_MAX_FRAGMENT_LENGTH - -/** - * \def MBEDTLS_SSL_PROTO_SSL3 - * - * Enable support for SSL 3.0. - * - * Requires: MBEDTLS_MD5_C - * MBEDTLS_SHA1_C - * - * Comment this macro to disable support for SSL 3.0 - */ -//#define MBEDTLS_SSL_PROTO_SSL3 - -/** - * \def MBEDTLS_SSL_PROTO_TLS1 - * - * Enable support for TLS 1.0. - * - * Requires: MBEDTLS_MD5_C - * MBEDTLS_SHA1_C - * - * Comment this macro to disable support for TLS 1.0 - */ -//#define MBEDTLS_SSL_PROTO_TLS1 - -/** - * \def MBEDTLS_SSL_PROTO_TLS1_1 - * - * Enable support for TLS 1.1 (and DTLS 1.0 if DTLS is enabled). - * - * Requires: MBEDTLS_MD5_C - * MBEDTLS_SHA1_C - * - * Comment this macro to disable support for TLS 1.1 / DTLS 1.0 - */ -//#define MBEDTLS_SSL_PROTO_TLS1_1 - -/** - * \def MBEDTLS_SSL_PROTO_TLS1_2 - * - * Enable support for TLS 1.2 (and DTLS 1.2 if DTLS is enabled). - * - * Requires: MBEDTLS_SHA1_C or MBEDTLS_SHA256_C or MBEDTLS_SHA512_C - * (Depends on ciphersuites) - * - * Comment this macro to disable support for TLS 1.2 / DTLS 1.2 - */ -//#define MBEDTLS_SSL_PROTO_TLS1_2 - -/** - * \def MBEDTLS_SSL_PROTO_DTLS - * - * Enable support for DTLS (all available versions). - * - * Enable this and MBEDTLS_SSL_PROTO_TLS1_1 to enable DTLS 1.0, - * and/or this and MBEDTLS_SSL_PROTO_TLS1_2 to enable DTLS 1.2. - * - * Requires: MBEDTLS_SSL_PROTO_TLS1_1 - * or MBEDTLS_SSL_PROTO_TLS1_2 - * - * Comment this macro to disable support for DTLS - */ -//#define MBEDTLS_SSL_PROTO_DTLS - -/** - * \def MBEDTLS_SSL_ALPN - * - * Enable support for RFC 7301 Application Layer Protocol Negotiation. - * - * Comment this macro to disable support for ALPN. - */ -//#define MBEDTLS_SSL_ALPN - -/** - * \def MBEDTLS_SSL_DTLS_ANTI_REPLAY - * - * Enable support for the anti-replay mechanism in DTLS. - * - * Requires: MBEDTLS_SSL_TLS_C - * MBEDTLS_SSL_PROTO_DTLS - * - * \warning Disabling this is often a security risk! - * See mbedtls_ssl_conf_dtls_anti_replay() for details. - * - * Comment this to disable anti-replay in DTLS. - */ -//#define MBEDTLS_SSL_DTLS_ANTI_REPLAY - -/** - * \def MBEDTLS_SSL_DTLS_HELLO_VERIFY - * - * Enable support for HelloVerifyRequest on DTLS servers. - * - * This feature is highly recommended to prevent DTLS servers being used as - * amplifiers in DoS attacks against other hosts. It should always be enabled - * unless you know for sure amplification cannot be a problem in the - * environment in which your server operates. - * - * \warning Disabling this can ba a security risk! (see above) - * - * Requires: MBEDTLS_SSL_PROTO_DTLS - * - * Comment this to disable support for HelloVerifyRequest. - */ -//#define MBEDTLS_SSL_DTLS_HELLO_VERIFY - -/** - * \def MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE - * - * Enable server-side support for clients that reconnect from the same port. - * - * Some clients unexpectedly close the connection and try to reconnect using the - * same source port. This needs special support from the server to handle the - * new connection securely, as described in section 4.2.8 of RFC 6347. This - * flag enables that support. - * - * Requires: MBEDTLS_SSL_DTLS_HELLO_VERIFY - * - * Comment this to disable support for clients reusing the source port. - */ -//#define MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE - -/** - * \def MBEDTLS_SSL_DTLS_BADMAC_LIMIT - * - * Enable support for a limit of records with bad MAC. - * - * See mbedtls_ssl_conf_dtls_badmac_limit(). - * - * Requires: MBEDTLS_SSL_PROTO_DTLS - */ -//#define MBEDTLS_SSL_DTLS_BADMAC_LIMIT - -/** - * \def MBEDTLS_SSL_SESSION_TICKETS - * - * Enable support for RFC 5077 session tickets in SSL. - * Client-side, provides full support for session tickets (maintainance of a - * session store remains the responsibility of the application, though). - * Server-side, you also need to provide callbacks for writing and parsing - * tickets, including authenticated encryption and key management. Example - * callbacks are provided by MBEDTLS_SSL_TICKET_C. - * - * Comment this macro to disable support for SSL session tickets - */ -//#define MBEDTLS_SSL_SESSION_TICKETS - -/** - * \def MBEDTLS_SSL_EXPORT_KEYS - * - * Enable support for exporting key block and master secret. - * This is required for certain users of TLS, e.g. EAP-TLS. - * - * Comment this macro to disable support for key export - */ -//#define MBEDTLS_SSL_EXPORT_KEYS - -/** - * \def MBEDTLS_SSL_SERVER_NAME_INDICATION - * - * Enable support for RFC 6066 server name indication (SNI) in SSL. - * - * Requires: MBEDTLS_X509_CRT_PARSE_C - * - * Comment this macro to disable support for server name indication in SSL - */ -//#define MBEDTLS_SSL_SERVER_NAME_INDICATION - -/** - * \def MBEDTLS_SSL_TRUNCATED_HMAC - * - * Enable support for RFC 6066 truncated HMAC in SSL. - * - * Comment this macro to disable support for truncated HMAC in SSL - */ -//#define MBEDTLS_SSL_TRUNCATED_HMAC - -/** - * \def MBEDTLS_THREADING_ALT - * - * Provide your own alternate threading implementation. - * - * Requires: MBEDTLS_THREADING_C - * - * Uncomment this to allow your own alternate threading implementation. - */ -//#define MBEDTLS_THREADING_ALT - -/** - * \def MBEDTLS_THREADING_PTHREAD - * - * Enable the pthread wrapper layer for the threading layer. - * - * Requires: MBEDTLS_THREADING_C - * - * Uncomment this to enable pthread mutexes. - */ -//#define MBEDTLS_THREADING_PTHREAD - -/** - * \def MBEDTLS_VERSION_FEATURES - * - * Allow run-time checking of compile-time enabled features. Thus allowing users - * to check at run-time if the library is for instance compiled with threading - * support via mbedtls_version_check_feature(). - * - * Requires: MBEDTLS_VERSION_C - * - * Comment this to disable run-time checking and save ROM space - */ -//#define MBEDTLS_VERSION_FEATURES - -/** - * \def MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 - * - * If set, the X509 parser will not break-off when parsing an X509 certificate - * and encountering an extension in a v1 or v2 certificate. - * - * Uncomment to prevent an error. - */ -//#define MBEDTLS_X509_ALLOW_EXTENSIONS_NON_V3 - -/** - * \def MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION - * - * If set, the X509 parser will not break-off when parsing an X509 certificate - * and encountering an unknown critical extension. - * - * \warning Depending on your PKI use, enabling this can be a security risk! - * - * Uncomment to prevent an error. - */ -//#define MBEDTLS_X509_ALLOW_UNSUPPORTED_CRITICAL_EXTENSION - -/** - * \def MBEDTLS_X509_CHECK_KEY_USAGE - * - * Enable verification of the keyUsage extension (CA and leaf certificates). - * - * Disabling this avoids problems with mis-issued and/or misused - * (intermediate) CA and leaf certificates. - * - * \warning Depending on your PKI use, disabling this can be a security risk! - * - * Comment to skip keyUsage checking for both CA and leaf certificates. - */ -//#define MBEDTLS_X509_CHECK_KEY_USAGE - -/** - * \def MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE - * - * Enable verification of the extendedKeyUsage extension (leaf certificates). - * - * Disabling this avoids problems with mis-issued and/or misused certificates. - * - * \warning Depending on your PKI use, disabling this can be a security risk! - * - * Comment to skip extendedKeyUsage checking for certificates. - */ -//#define MBEDTLS_X509_CHECK_EXTENDED_KEY_USAGE - -/** - * \def MBEDTLS_X509_RSASSA_PSS_SUPPORT - * - * Enable parsing and verification of X.509 certificates, CRLs and CSRS - * signed with RSASSA-PSS (aka PKCS#1 v2.1). - * - * Comment this macro to disallow using RSASSA-PSS in certificates. - */ -//#define MBEDTLS_X509_RSASSA_PSS_SUPPORT - -/** - * \def MBEDTLS_ZLIB_SUPPORT - * - * If set, the SSL/TLS module uses ZLIB to support compression and - * decompression of packet data. - * - * \warning TLS-level compression MAY REDUCE SECURITY! See for example the - * CRIME attack. Before enabling this option, you should examine with care if - * CRIME or similar exploits may be a applicable to your use case. - * - * \note Currently compression can't be used with DTLS. - * - * Used in: library/ssl_tls.c - * library/ssl_cli.c - * library/ssl_srv.c - * - * This feature requires zlib library and headers to be present. - * - * Uncomment to enable use of ZLIB - */ -//#define MBEDTLS_ZLIB_SUPPORT -/* \} name SECTION: mbed TLS feature support */ - -/** - * \name SECTION: mbed TLS modules - * - * This section enables or disables entire modules in mbed TLS - * \{ - */ - -/** - * \def MBEDTLS_AESNI_C - * - * Enable AES-NI support on x86-64. - * - * Module: library/aesni.c - * Caller: library/aes.c - * - * Requires: MBEDTLS_HAVE_ASM - * - * This modules adds support for the AES-NI instructions on x86-64 - */ -//#define MBEDTLS_AESNI_C - -/** - * \def MBEDTLS_AES_C - * - * Enable the AES block cipher. - * - * Module: library/aes.c - * Caller: library/ssl_tls.c - * library/pem.c - * library/ctr_drbg.c - * - * This module enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_DHE_RSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_ECDHE_RSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_DHE_RSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_PSK_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_AES_128_CBC_SHA - * MBEDTLS_TLS_PSK_WITH_AES_256_GCM_SHA384 - * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA384 - * MBEDTLS_TLS_PSK_WITH_AES_256_CBC_SHA - * MBEDTLS_TLS_PSK_WITH_AES_128_GCM_SHA256 - * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA256 - * MBEDTLS_TLS_PSK_WITH_AES_128_CBC_SHA - * - * PEM_PARSE uses AES for decrypting encrypted keys. - */ -#define MBEDTLS_AES_C - -/** - * \def MBEDTLS_ARC4_C - * - * Enable the ARCFOUR stream cipher. - * - * Module: library/arc4.c - * Caller: library/ssl_tls.c - * - * This module enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDH_ECDSA_WITH_RC4_128_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_RC4_128_SHA - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_RC4_128_SHA - * MBEDTLS_TLS_ECDHE_RSA_WITH_RC4_128_SHA - * MBEDTLS_TLS_ECDHE_PSK_WITH_RC4_128_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_RC4_128_SHA - * MBEDTLS_TLS_RSA_WITH_RC4_128_SHA - * MBEDTLS_TLS_RSA_WITH_RC4_128_MD5 - * MBEDTLS_TLS_RSA_PSK_WITH_RC4_128_SHA - * MBEDTLS_TLS_PSK_WITH_RC4_128_SHA - */ -//#define MBEDTLS_ARC4_C - -/** - * \def MBEDTLS_ASN1_PARSE_C - * - * Enable the generic ASN1 parser. - * - * Module: library/asn1.c - * Caller: library/x509.c - * library/dhm.c - * library/pkcs12.c - * library/pkcs5.c - * library/pkparse.c - */ -//#define MBEDTLS_ASN1_PARSE_C - -/** - * \def MBEDTLS_ASN1_WRITE_C - * - * Enable the generic ASN1 writer. - * - * Module: library/asn1write.c - * Caller: library/ecdsa.c - * library/pkwrite.c - * library/x509_create.c - * library/x509write_crt.c - * library/x509write_csr.c - */ -//#define MBEDTLS_ASN1_WRITE_C - -/** - * \def MBEDTLS_BASE64_C - * - * Enable the Base64 module. - * - * Module: library/base64.c - * Caller: library/pem.c - * - * This module is required for PEM support (required by X.509). - */ -#define MBEDTLS_BASE64_C - -/** - * \def MBEDTLS_BIGNUM_C - * - * Enable the multi-precision integer library. - * - * Module: library/bignum.c - * Caller: library/dhm.c - * library/ecp.c - * library/ecdsa.c - * library/rsa.c - * library/ssl_tls.c - * - * This module is required for RSA, DHM and ECC (ECDH, ECDSA) support. - */ -//#define MBEDTLS_BIGNUM_C - -/** - * \def MBEDTLS_BLOWFISH_C - * - * Enable the Blowfish block cipher. - * - * Module: library/blowfish.c - */ -//#define MBEDTLS_BLOWFISH_C - -/** - * \def MBEDTLS_CAMELLIA_C - * - * Enable the Camellia block cipher. - * - * Module: library/camellia.c - * Caller: library/ssl_tls.c - * - * This module enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDH_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_256_CBC_SHA - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_DHE_RSA_WITH_CAMELLIA_128_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_DHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_ECDHE_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_256_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_RSA_WITH_CAMELLIA_128_CBC_SHA - * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_RSA_PSK_WITH_CAMELLIA_128_CBC_SHA256 - * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_GCM_SHA384 - * MBEDTLS_TLS_PSK_WITH_CAMELLIA_256_CBC_SHA384 - * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_GCM_SHA256 - * MBEDTLS_TLS_PSK_WITH_CAMELLIA_128_CBC_SHA256 - */ -//#define MBEDTLS_CAMELLIA_C - -/** - * \def MBEDTLS_CCM_C - * - * Enable the Counter with CBC-MAC (CCM) mode for 128-bit block cipher. - * - * Module: library/ccm.c - * - * Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C - * - * This module enables the AES-CCM ciphersuites, if other requisites are - * enabled as well. - */ -//#define MBEDTLS_CCM_C - -/** - * \def MBEDTLS_CERTS_C - * - * Enable the test certificates. - * - * Module: library/certs.c - * Caller: - * - * This module is used for testing (ssl_client/server). - */ -//#define MBEDTLS_CERTS_C - -/** - * \def MBEDTLS_CIPHER_C - * - * Enable the generic cipher layer. - * - * Module: library/cipher.c - * Caller: library/ssl_tls.c - * - * Uncomment to enable generic cipher wrappers. - */ -#define MBEDTLS_CIPHER_C - -/** - * \def MBEDTLS_CMAC_C - * - * Enable the CMAC (Cipher-based Message Authentication Code) mode for block - * ciphers. - * - * Module: library/cmac.c - * - * Requires: MBEDTLS_AES_C or MBEDTLS_DES_C - * - */ -#define MBEDTLS_CMAC_C - -/** - * \def MBEDTLS_CTR_DRBG_C - * - * Enable the CTR_DRBG AES-256-based random generator. - * - * Module: library/ctr_drbg.c - * Caller: - * - * Requires: MBEDTLS_AES_C - * - * This module provides the CTR_DRBG AES-256 random number generator. - */ -//#define MBEDTLS_CTR_DRBG_C - -/** - * \def MBEDTLS_DEBUG_C - * - * Enable the debug functions. - * - * Module: library/debug.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * library/ssl_tls.c - * - * This module provides debugging functions. - */ -//#define MBEDTLS_DEBUG_C - -/** - * \def MBEDTLS_DES_C - * - * Enable the DES block cipher. - * - * Module: library/des.c - * Caller: library/pem.c - * library/ssl_tls.c - * - * This module enables the following ciphersuites (if other requisites are - * enabled as well): - * MBEDTLS_TLS_ECDH_ECDSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDH_RSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDHE_ECDSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDHE_RSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_DHE_RSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_ECDHE_PSK_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_DHE_PSK_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_RSA_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_RSA_PSK_WITH_3DES_EDE_CBC_SHA - * MBEDTLS_TLS_PSK_WITH_3DES_EDE_CBC_SHA - * - * PEM_PARSE uses DES/3DES for decrypting encrypted keys. - */ -//#define MBEDTLS_DES_C - -/** - * \def MBEDTLS_DHM_C - * - * Enable the Diffie-Hellman-Merkle module. - * - * Module: library/dhm.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * - * This module is used by the following key exchanges: - * DHE-RSA, DHE-PSK - */ -//#define MBEDTLS_DHM_C - -/** - * \def MBEDTLS_ECDH_C - * - * Enable the elliptic curve Diffie-Hellman library. - * - * Module: library/ecdh.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * - * This module is used by the following key exchanges: - * ECDHE-ECDSA, ECDHE-RSA, DHE-PSK - * - * Requires: MBEDTLS_ECP_C - */ -//#define MBEDTLS_ECDH_C - -/** - * \def MBEDTLS_ECDSA_C - * - * Enable the elliptic curve DSA library. - * - * Module: library/ecdsa.c - * Caller: - * - * This module is used by the following key exchanges: - * ECDHE-ECDSA - * - * Requires: MBEDTLS_ECP_C, MBEDTLS_ASN1_WRITE_C, MBEDTLS_ASN1_PARSE_C - */ -//#define MBEDTLS_ECDSA_C - -/** - * \def MBEDTLS_ECJPAKE_C - * - * Enable the elliptic curve J-PAKE library. - * - * \warning This is currently experimental. EC J-PAKE support is based on the - * Thread v1.0.0 specification; incompatible changes to the specification - * might still happen. For this reason, this is disabled by default. - * - * Module: library/ecjpake.c - * Caller: - * - * This module is used by the following key exchanges: - * ECJPAKE - * - * Requires: MBEDTLS_ECP_C, MBEDTLS_MD_C - */ -//#define MBEDTLS_ECJPAKE_C - -/** - * \def MBEDTLS_ECP_C - * - * Enable the elliptic curve over GF(p) library. - * - * Module: library/ecp.c - * Caller: library/ecdh.c - * library/ecdsa.c - * library/ecjpake.c - * - * Requires: MBEDTLS_BIGNUM_C and at least one MBEDTLS_ECP_DP_XXX_ENABLED - */ -//#define MBEDTLS_ECP_C - -/** - * \def MBEDTLS_ENTROPY_C - * - * Enable the platform-specific entropy code. - * - * Module: library/entropy.c - * Caller: - * - * Requires: MBEDTLS_SHA512_C or MBEDTLS_SHA256_C - * - * This module provides a generic entropy pool - */ -//#define MBEDTLS_ENTROPY_C - -/** - * \def MBEDTLS_ERROR_C - * - * Enable error code to error string conversion. - * - * Module: library/error.c - * Caller: - * - * This module enables mbedtls_strerror(). - */ -//#define MBEDTLS_ERROR_C - -/** - * \def MBEDTLS_GCM_C - * - * Enable the Galois/Counter Mode (GCM) for AES. - * - * Module: library/gcm.c - * - * Requires: MBEDTLS_AES_C or MBEDTLS_CAMELLIA_C - * - * This module enables the AES-GCM and CAMELLIA-GCM ciphersuites, if other - * requisites are enabled as well. - */ -//#define MBEDTLS_GCM_C - -/** - * \def MBEDTLS_HAVEGE_C - * - * Enable the HAVEGE random generator. - * - * Warning: the HAVEGE random generator is not suitable for virtualized - * environments - * - * Warning: the HAVEGE random generator is dependent on timing and specific - * processor traits. It is therefore not advised to use HAVEGE as - * your applications primary random generator or primary entropy pool - * input. As a secondary input to your entropy pool, it IS able add - * the (limited) extra entropy it provides. - * - * Module: library/havege.c - * Caller: - * - * Requires: MBEDTLS_TIMING_C - * - * Uncomment to enable the HAVEGE random generator. - */ -//#define MBEDTLS_HAVEGE_C - -/** - * \def MBEDTLS_HMAC_DRBG_C - * - * Enable the HMAC_DRBG random generator. - * - * Module: library/hmac_drbg.c - * Caller: - * - * Requires: MBEDTLS_MD_C - * - * Uncomment to enable the HMAC_DRBG random number geerator. - */ -//#define MBEDTLS_HMAC_DRBG_C - -/** - * \def MBEDTLS_MD_C - * - * Enable the generic message digest layer. - * - * Module: library/md.c - * Caller: - * - * Uncomment to enable generic message digest wrappers. - */ -//#define MBEDTLS_MD_C - -/** - * \def MBEDTLS_MD2_C - * - * Enable the MD2 hash algorithm. - * - * Module: library/md2.c - * Caller: - * - * Uncomment to enable support for (rare) MD2-signed X.509 certs. - */ -//#define MBEDTLS_MD2_C - -/** - * \def MBEDTLS_MD4_C - * - * Enable the MD4 hash algorithm. - * - * Module: library/md4.c - * Caller: - * - * Uncomment to enable support for (rare) MD4-signed X.509 certs. - */ -//#define MBEDTLS_MD4_C - -/** - * \def MBEDTLS_MD5_C - * - * Enable the MD5 hash algorithm. - * - * Module: library/md5.c - * Caller: library/md.c - * library/pem.c - * library/ssl_tls.c - * - * This module is required for SSL/TLS and X.509. - * PEM_PARSE uses MD5 for decrypting encrypted keys. - */ -//#define MBEDTLS_MD5_C - -/** - * \def MBEDTLS_MEMORY_BUFFER_ALLOC_C - * - * Enable the buffer allocator implementation that makes use of a (stack) - * based buffer to 'allocate' dynamic memory. (replaces calloc() and free() - * calls) - * - * Module: library/memory_buffer_alloc.c - * - * Requires: MBEDTLS_PLATFORM_C - * MBEDTLS_PLATFORM_MEMORY (to use it within mbed TLS) - * - * Enable this module to enable the buffer memory allocator. - */ -//#define MBEDTLS_MEMORY_BUFFER_ALLOC_C - -/** - * \def MBEDTLS_NET_C - * - * Enable the TCP and UDP over IPv6/IPv4 networking routines. - * - * \note This module only works on POSIX/Unix (including Linux, BSD and OS X) - * and Windows. For other platforms, you'll want to disable it, and write your - * own networking callbacks to be passed to \c mbedtls_ssl_set_bio(). - * - * \note See also our Knowledge Base article about porting to a new - * environment: - * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS - * - * Module: library/net_sockets.c - * - * This module provides networking routines. - */ -//#define MBEDTLS_NET_C - -/** - * \def MBEDTLS_OID_C - * - * Enable the OID database. - * - * Module: library/oid.c - * Caller: library/asn1write.c - * library/pkcs5.c - * library/pkparse.c - * library/pkwrite.c - * library/rsa.c - * library/x509.c - * library/x509_create.c - * library/x509_crl.c - * library/x509_crt.c - * library/x509_csr.c - * library/x509write_crt.c - * library/x509write_csr.c - * - * This modules translates between OIDs and internal values. - */ -//#define MBEDTLS_OID_C - -/** - * \def MBEDTLS_PADLOCK_C - * - * Enable VIA Padlock support on x86. - * - * Module: library/padlock.c - * Caller: library/aes.c - * - * Requires: MBEDTLS_HAVE_ASM - * - * This modules adds support for the VIA PadLock on x86. - */ -//#define MBEDTLS_PADLOCK_C - -/** - * \def MBEDTLS_PEM_PARSE_C - * - * Enable PEM decoding / parsing. - * - * Module: library/pem.c - * Caller: library/dhm.c - * library/pkparse.c - * library/x509_crl.c - * library/x509_crt.c - * library/x509_csr.c - * - * Requires: MBEDTLS_BASE64_C - * - * This modules adds support for decoding / parsing PEM files. - */ -//#define MBEDTLS_PEM_PARSE_C - -/** - * \def MBEDTLS_PEM_WRITE_C - * - * Enable PEM encoding / writing. - * - * Module: library/pem.c - * Caller: library/pkwrite.c - * library/x509write_crt.c - * library/x509write_csr.c - * - * Requires: MBEDTLS_BASE64_C - * - * This modules adds support for encoding / writing PEM files. - */ -//#define MBEDTLS_PEM_WRITE_C - -/** - * \def MBEDTLS_PK_C - * - * Enable the generic public (asymetric) key layer. - * - * Module: library/pk.c - * Caller: library/ssl_tls.c - * library/ssl_cli.c - * library/ssl_srv.c - * - * Requires: MBEDTLS_RSA_C or MBEDTLS_ECP_C - * - * Uncomment to enable generic public key wrappers. - */ -//#define MBEDTLS_PK_C - -/** - * \def MBEDTLS_PK_PARSE_C - * - * Enable the generic public (asymetric) key parser. - * - * Module: library/pkparse.c - * Caller: library/x509_crt.c - * library/x509_csr.c - * - * Requires: MBEDTLS_PK_C - * - * Uncomment to enable generic public key parse functions. - */ -//#define MBEDTLS_PK_PARSE_C - -/** - * \def MBEDTLS_PK_WRITE_C - * - * Enable the generic public (asymetric) key writer. - * - * Module: library/pkwrite.c - * Caller: library/x509write.c - * - * Requires: MBEDTLS_PK_C - * - * Uncomment to enable generic public key write functions. - */ -//#define MBEDTLS_PK_WRITE_C - -/** - * \def MBEDTLS_PKCS5_C - * - * Enable PKCS#5 functions. - * - * Module: library/pkcs5.c - * - * Requires: MBEDTLS_MD_C - * - * This module adds support for the PKCS#5 functions. - */ -//#define MBEDTLS_PKCS5_C - -/** - * \def MBEDTLS_PKCS11_C - * - * Enable wrapper for PKCS#11 smartcard support. - * - * Module: library/pkcs11.c - * Caller: library/pk.c - * - * Requires: MBEDTLS_PK_C - * - * This module enables SSL/TLS PKCS #11 smartcard support. - * Requires the presence of the PKCS#11 helper library (libpkcs11-helper) - */ -//#define MBEDTLS_PKCS11_C - -/** - * \def MBEDTLS_PKCS12_C - * - * Enable PKCS#12 PBE functions. - * Adds algorithms for parsing PKCS#8 encrypted private keys - * - * Module: library/pkcs12.c - * Caller: library/pkparse.c - * - * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_CIPHER_C, MBEDTLS_MD_C - * Can use: MBEDTLS_ARC4_C - * - * This module enables PKCS#12 functions. - */ -//#define MBEDTLS_PKCS12_C - -/** - * \def MBEDTLS_PLATFORM_C - * - * Enable the platform abstraction layer that allows you to re-assign - * functions like calloc(), free(), snprintf(), printf(), fprintf(), exit(). - * - * Enabling MBEDTLS_PLATFORM_C enables to use of MBEDTLS_PLATFORM_XXX_ALT - * or MBEDTLS_PLATFORM_XXX_MACRO directives, allowing the functions mentioned - * above to be specified at runtime or compile time respectively. - * - * \note This abstraction layer must be enabled on Windows (including MSYS2) - * as other module rely on it for a fixed snprintf implementation. - * - * Module: library/platform.c - * Caller: Most other .c files - * - * This module enables abstraction of common (libc) functions. - */ -//#define MBEDTLS_PLATFORM_C - -/** - * \def MBEDTLS_RIPEMD160_C - * - * Enable the RIPEMD-160 hash algorithm. - * - * Module: library/ripemd160.c - * Caller: library/md.c - * - */ -//#define MBEDTLS_RIPEMD160_C - -/** - * \def MBEDTLS_RSA_C - * - * Enable the RSA public-key cryptosystem. - * - * Module: library/rsa.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * library/ssl_tls.c - * library/x509.c - * - * This module is used by the following key exchanges: - * RSA, DHE-RSA, ECDHE-RSA, RSA-PSK - * - * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C - */ -//#define MBEDTLS_RSA_C - -/** - * \def MBEDTLS_SHA1_C - * - * Enable the SHA1 cryptographic hash algorithm. - * - * Module: library/sha1.c - * Caller: library/md.c - * library/ssl_cli.c - * library/ssl_srv.c - * library/ssl_tls.c - * library/x509write_crt.c - * - * This module is required for SSL/TLS up to version 1.1, for TLS 1.2 - * depending on the handshake parameters, and for SHA1-signed certificates. - */ -//#define MBEDTLS_SHA1_C - -/** - * \def MBEDTLS_SHA256_C - * - * Enable the SHA-224 and SHA-256 cryptographic hash algorithms. - * - * Module: library/sha256.c - * Caller: library/entropy.c - * library/md.c - * library/ssl_cli.c - * library/ssl_srv.c - * library/ssl_tls.c - * - * This module adds support for SHA-224 and SHA-256. - * This module is required for the SSL/TLS 1.2 PRF function. - */ -//#define MBEDTLS_SHA256_C - -/** - * \def MBEDTLS_SHA512_C - * - * Enable the SHA-384 and SHA-512 cryptographic hash algorithms. - * - * Module: library/sha512.c - * Caller: library/entropy.c - * library/md.c - * library/ssl_cli.c - * library/ssl_srv.c - * - * This module adds support for SHA-384 and SHA-512. - */ -//#define MBEDTLS_SHA512_C - -/** - * \def MBEDTLS_SSL_CACHE_C - * - * Enable simple SSL cache implementation. - * - * Module: library/ssl_cache.c - * Caller: - * - * Requires: MBEDTLS_SSL_CACHE_C - */ -//#define MBEDTLS_SSL_CACHE_C - -/** - * \def MBEDTLS_SSL_COOKIE_C - * - * Enable basic implementation of DTLS cookies for hello verification. - * - * Module: library/ssl_cookie.c - * Caller: - */ -//#define MBEDTLS_SSL_COOKIE_C - -/** - * \def MBEDTLS_SSL_TICKET_C - * - * Enable an implementation of TLS server-side callbacks for session tickets. - * - * Module: library/ssl_ticket.c - * Caller: - * - * Requires: MBEDTLS_CIPHER_C - */ -//#define MBEDTLS_SSL_TICKET_C - -/** - * \def MBEDTLS_SSL_CLI_C - * - * Enable the SSL/TLS client code. - * - * Module: library/ssl_cli.c - * Caller: - * - * Requires: MBEDTLS_SSL_TLS_C - * - * This module is required for SSL/TLS client support. - */ -//#define MBEDTLS_SSL_CLI_C - -/** - * \def MBEDTLS_SSL_SRV_C - * - * Enable the SSL/TLS server code. - * - * Module: library/ssl_srv.c - * Caller: - * - * Requires: MBEDTLS_SSL_TLS_C - * - * This module is required for SSL/TLS server support. - */ -//#define MBEDTLS_SSL_SRV_C - -/** - * \def MBEDTLS_SSL_TLS_C - * - * Enable the generic SSL/TLS code. - * - * Module: library/ssl_tls.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * - * Requires: MBEDTLS_CIPHER_C, MBEDTLS_MD_C - * and at least one of the MBEDTLS_SSL_PROTO_XXX defines - * - * This module is required for SSL/TLS. - */ -//#define MBEDTLS_SSL_TLS_C - -/** - * \def MBEDTLS_THREADING_C - * - * Enable the threading abstraction layer. - * By default mbed TLS assumes it is used in a non-threaded environment or that - * contexts are not shared between threads. If you do intend to use contexts - * between threads, you will need to enable this layer to prevent race - * conditions. See also our Knowledge Base article about threading: - * https://tls.mbed.org/kb/development/thread-safety-and-multi-threading - * - * Module: library/threading.c - * - * This allows different threading implementations (self-implemented or - * provided). - * - * You will have to enable either MBEDTLS_THREADING_ALT or - * MBEDTLS_THREADING_PTHREAD. - * - * Enable this layer to allow use of mutexes within mbed TLS - */ -//#define MBEDTLS_THREADING_C - -/** - * \def MBEDTLS_TIMING_C - * - * Enable the semi-portable timing interface. - * - * \note The provided implementation only works on POSIX/Unix (including Linux, - * BSD and OS X) and Windows. On other platforms, you can either disable that - * module and provide your own implementations of the callbacks needed by - * \c mbedtls_ssl_set_timer_cb() for DTLS, or leave it enabled and provide - * your own implementation of the whole module by setting - * \c MBEDTLS_TIMING_ALT in the current file. - * - * \note See also our Knowledge Base article about porting to a new - * environment: - * https://tls.mbed.org/kb/how-to/how-do-i-port-mbed-tls-to-a-new-environment-OS - * - * Module: library/timing.c - * Caller: library/havege.c - * - * This module is used by the HAVEGE random number generator. - */ -//#define MBEDTLS_TIMING_C - -/** - * \def MBEDTLS_VERSION_C - * - * Enable run-time version information. - * - * Module: library/version.c - * - * This module provides run-time version information. - */ -//#define MBEDTLS_VERSION_C - -/** - * \def MBEDTLS_X509_USE_C - * - * Enable X.509 core for using certificates. - * - * Module: library/x509.c - * Caller: library/x509_crl.c - * library/x509_crt.c - * library/x509_csr.c - * - * Requires: MBEDTLS_ASN1_PARSE_C, MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, - * MBEDTLS_PK_PARSE_C - * - * This module is required for the X.509 parsing modules. - */ -//#define MBEDTLS_X509_USE_C - -/** - * \def MBEDTLS_X509_CRT_PARSE_C - * - * Enable X.509 certificate parsing. - * - * Module: library/x509_crt.c - * Caller: library/ssl_cli.c - * library/ssl_srv.c - * library/ssl_tls.c - * - * Requires: MBEDTLS_X509_USE_C - * - * This module is required for X.509 certificate parsing. - */ -//#define MBEDTLS_X509_CRT_PARSE_C - -/** - * \def MBEDTLS_X509_CRL_PARSE_C - * - * Enable X.509 CRL parsing. - * - * Module: library/x509_crl.c - * Caller: library/x509_crt.c - * - * Requires: MBEDTLS_X509_USE_C - * - * This module is required for X.509 CRL parsing. - */ -//#define MBEDTLS_X509_CRL_PARSE_C - -/** - * \def MBEDTLS_X509_CSR_PARSE_C - * - * Enable X.509 Certificate Signing Request (CSR) parsing. - * - * Module: library/x509_csr.c - * Caller: library/x509_crt_write.c - * - * Requires: MBEDTLS_X509_USE_C - * - * This module is used for reading X.509 certificate request. - */ -//#define MBEDTLS_X509_CSR_PARSE_C - -/** - * \def MBEDTLS_X509_CREATE_C - * - * Enable X.509 core for creating certificates. - * - * Module: library/x509_create.c - * - * Requires: MBEDTLS_BIGNUM_C, MBEDTLS_OID_C, MBEDTLS_PK_WRITE_C - * - * This module is the basis for creating X.509 certificates and CSRs. - */ -//#define MBEDTLS_X509_CREATE_C - -/** - * \def MBEDTLS_X509_CRT_WRITE_C - * - * Enable creating X.509 certificates. - * - * Module: library/x509_crt_write.c - * - * Requires: MBEDTLS_X509_CREATE_C - * - * This module is required for X.509 certificate creation. - */ -//#define MBEDTLS_X509_CRT_WRITE_C - -/** - * \def MBEDTLS_X509_CSR_WRITE_C - * - * Enable creating X.509 Certificate Signing Requests (CSR). - * - * Module: library/x509_csr_write.c - * - * Requires: MBEDTLS_X509_CREATE_C - * - * This module is required for X.509 certificate request writing. - */ -//#define MBEDTLS_X509_CSR_WRITE_C - -/** - * \def MBEDTLS_XTEA_C - * - * Enable the XTEA block cipher. - * - * Module: library/xtea.c - * Caller: - */ -//#define MBEDTLS_XTEA_C - -/* \} name SECTION: mbed TLS modules */ - -/** - * \name SECTION: Module configuration options - * - * This section allows for the setting of module specific sizes and - * configuration options. The default values are already present in the - * relevant header files and should suffice for the regular use cases. - * - * Our advice is to enable options and change their values here - * only if you have a good reason and know the consequences. - * - * Please check the respective header file for documentation on these - * parameters (to prevent duplicate documentation). - * \{ - */ - -/* MPI / BIGNUM options */ -//#define MBEDTLS_MPI_WINDOW_SIZE 6 /**< Maximum windows size used. */ -//#define MBEDTLS_MPI_MAX_SIZE 1024 /**< Maximum number of bytes for usable MPIs. */ - -/* CTR_DRBG options */ -//#define MBEDTLS_CTR_DRBG_ENTROPY_LEN 48 /**< Amount of entropy used per seed by -//default (48 with SHA-512, 32 with SHA-256) */ #define MBEDTLS_CTR_DRBG_RESEED_INTERVAL 10000 /**< -//Interval before reseed is performed by default */ #define MBEDTLS_CTR_DRBG_MAX_INPUT 256 /**< -//Maximum number of additional input bytes */ #define MBEDTLS_CTR_DRBG_MAX_REQUEST 1024 -///**< Maximum number of requested bytes per call */ #define MBEDTLS_CTR_DRBG_MAX_SEED_INPUT 384 -///**< Maximum size of (re)seed buffer */ - -/* HMAC_DRBG options */ -//#define MBEDTLS_HMAC_DRBG_RESEED_INTERVAL 10000 /**< Interval before reseed is performed by -//default */ #define MBEDTLS_HMAC_DRBG_MAX_INPUT 256 /**< Maximum number of additional -//input bytes */ #define MBEDTLS_HMAC_DRBG_MAX_REQUEST 1024 /**< Maximum number of requested -//bytes per call */ #define MBEDTLS_HMAC_DRBG_MAX_SEED_INPUT 384 /**< Maximum size of (re)seed -//buffer */ - -/* ECP options */ -//#define MBEDTLS_ECP_MAX_BITS 521 /**< Maximum bit size of groups */ -//#define MBEDTLS_ECP_WINDOW_SIZE 6 /**< Maximum window size used */ -//#define MBEDTLS_ECP_FIXED_POINT_OPTIM 1 /**< Enable fixed-point speed-up */ - -/* Entropy options */ -//#define MBEDTLS_ENTROPY_MAX_SOURCES 20 /**< Maximum number of sources supported */ -//#define MBEDTLS_ENTROPY_MAX_GATHER 128 /**< Maximum amount requested from entropy -//sources */ #define MBEDTLS_ENTROPY_MIN_HARDWARE 32 /**< Default minimum number of -//bytes required for the hardware entropy source mbedtls_hardware_poll() before entropy is released -//*/ - -/* Memory buffer allocator options */ -//#define MBEDTLS_MEMORY_ALIGN_MULTIPLE 4 /**< Align on multiples of this value */ - -/* Platform options */ -//#define MBEDTLS_PLATFORM_STD_MEM_HDR /**< Header to include if -//MBEDTLS_PLATFORM_NO_STD_FUNCTIONS is defined. Don't define if no header is needed. */ #define -//MBEDTLS_PLATFORM_STD_CALLOC calloc /**< Default allocator to use, can be undefined */ -//#define MBEDTLS_PLATFORM_STD_FREE free /**< Default free to use, can be undefined */ -//#define MBEDTLS_PLATFORM_STD_EXIT exit /**< Default exit to use, can be undefined */ -//#define MBEDTLS_PLATFORM_STD_TIME time /**< Default time to use, can be undefined. -//MBEDTLS_HAVE_TIME must be enabled */ #define MBEDTLS_PLATFORM_STD_FPRINTF fprintf /**< -//Default fprintf to use, can be undefined */ #define MBEDTLS_PLATFORM_STD_PRINTF printf /**< -//Default printf to use, can be undefined */ -/* Note: your snprintf must correclty zero-terminate the buffer! */ -//#define MBEDTLS_PLATFORM_STD_SNPRINTF snprintf /**< Default snprintf to use, can be undefined -//*/ #define MBEDTLS_PLATFORM_STD_EXIT_SUCCESS 0 /**< Default exit value to use, can be -//undefined */ #define MBEDTLS_PLATFORM_STD_EXIT_FAILURE 1 /**< Default exit value to use, can -//be undefined */ #define MBEDTLS_PLATFORM_STD_NV_SEED_READ mbedtls_platform_std_nv_seed_read /**< -//Default nv_seed_read function to use, can be undefined */ #define -//MBEDTLS_PLATFORM_STD_NV_SEED_WRITE mbedtls_platform_std_nv_seed_write /**< Default nv_seed_write -//function to use, can be undefined */ #define MBEDTLS_PLATFORM_STD_NV_SEED_FILE "seedfile" /**< -//Seed file to read/write with default implementation */ - -/* To Use Function Macros MBEDTLS_PLATFORM_C must be enabled */ -/* MBEDTLS_PLATFORM_XXX_MACRO and MBEDTLS_PLATFORM_XXX_ALT cannot both be defined */ -//#define MBEDTLS_PLATFORM_CALLOC_MACRO calloc /**< Default allocator macro to use, can be -//undefined */ #define MBEDTLS_PLATFORM_FREE_MACRO free /**< Default free macro to use, -//can be undefined */ #define MBEDTLS_PLATFORM_EXIT_MACRO exit /**< Default exit macro to -//use, can be undefined */ #define MBEDTLS_PLATFORM_TIME_MACRO time /**< Default time -//macro to use, can be undefined. MBEDTLS_HAVE_TIME must be enabled */ #define -//MBEDTLS_PLATFORM_TIME_TYPE_MACRO time_t /**< Default time macro to use, can be undefined. -//MBEDTLS_HAVE_TIME must be enabled */ #define MBEDTLS_PLATFORM_FPRINTF_MACRO fprintf /**< -//Default fprintf macro to use, can be undefined */ #define MBEDTLS_PLATFORM_PRINTF_MACRO printf -///**< Default printf macro to use, can be undefined */ -/* Note: your snprintf must correclty zero-terminate the buffer! */ -//#define MBEDTLS_PLATFORM_SNPRINTF_MACRO snprintf /**< Default snprintf macro to use, can be -//undefined */ #define MBEDTLS_PLATFORM_NV_SEED_READ_MACRO mbedtls_platform_std_nv_seed_read /**< -//Default nv_seed_read function to use, can be undefined */ #define -//MBEDTLS_PLATFORM_NV_SEED_WRITE_MACRO mbedtls_platform_std_nv_seed_write /**< Default -//nv_seed_write function to use, can be undefined */ - -/* SSL Cache options */ -//#define MBEDTLS_SSL_CACHE_DEFAULT_TIMEOUT 86400 /**< 1 day */ -//#define MBEDTLS_SSL_CACHE_DEFAULT_MAX_ENTRIES 50 /**< Maximum entries in cache */ - -/* SSL options */ -//#define MBEDTLS_SSL_MAX_CONTENT_LEN 16384 /**< Maxium fragment length in bytes, -//determines the size of each of the two internal I/O buffers */ #define -//MBEDTLS_SSL_DEFAULT_TICKET_LIFETIME 86400 /**< Lifetime of session tickets (if enabled) */ -//#define MBEDTLS_PSK_MAX_LEN 32 /**< Max size of TLS pre-shared keys, in bytes -//(default 256 bits) */ #define MBEDTLS_SSL_COOKIE_TIMEOUT 60 /**< Default expiration delay -//of DTLS cookies, in seconds if HAVE_TIME, or in number of cookies issued */ - -/** - * Complete list of ciphersuites to use, in order of preference. - * - * \warning No dependency checking is done on that field! This option can only - * be used to restrict the set of available ciphersuites. It is your - * responsibility to make sure the needed modules are active. - * - * Use this to save a few hundred bytes of ROM (default ordering of all - * available ciphersuites) and a few to a few hundred bytes of RAM. - * - * The value below is only an example, not the default. - */ -//#define MBEDTLS_SSL_CIPHERSUITES -//MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_256_GCM_SHA384,MBEDTLS_TLS_ECDHE_ECDSA_WITH_AES_128_GCM_SHA256 - -/* X509 options */ -//#define MBEDTLS_X509_MAX_INTERMEDIATE_CA 8 /**< Maximum number of intermediate CAs in a -//verification chain. */ #define MBEDTLS_X509_MAX_FILE_PATH_LEN 512 /**< Maximum length of a -//path/filename string in bytes including the null terminator character ('\0'). */ - -/** - * Allow SHA-1 in the default TLS configuration for certificate signing. - * Without this build-time option, SHA-1 support must be activated explicitly - * through mbedtls_ssl_conf_cert_profile. Turning on this option is not - * recommended because of it is possible to generte SHA-1 collisions, however - * this may be safe for legacy infrastructure where additional controls apply. - */ -// #define MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_CERTIFICATES - -/** - * Allow SHA-1 in the default TLS configuration for TLS 1.2 handshake - * signature and ciphersuite selection. Without this build-time option, SHA-1 - * support must be activated explicitly through mbedtls_ssl_conf_sig_hashes. - * The use of SHA-1 in TLS <= 1.1 and in HMAC-SHA-1 is always allowed by - * default. At the time of writing, there is no practical attack on the use - * of SHA-1 in handshake signatures, hence this option is turned on by default - * for compatibility with existing peers. - */ -//#define MBEDTLS_TLS_DEFAULT_ALLOW_SHA1_IN_KEY_EXCHANGE +// Reduce ROM usage by optimizing some mbedtls features. +// These are only reference configurations for this LoRa example application. +// Other LoRa applications might need different configurations. +#define MBEDTLS_AES_FEWER_TABLES -#include "check_config.h" +#undef MBEDTLS_GCM_C +#undef MBEDTLS_CHACHA20_C +#undef MBEDTLS_CHACHAPOLY_C +#undef MBEDTLS_POLY1305_C #endif /* MBEDTLS_LORA_CONFIG_H */ \ No newline at end of file diff --git a/minimal-printf.lib b/minimal-printf.lib new file mode 100644 index 0000000..e10d99d --- /dev/null +++ b/minimal-printf.lib @@ -0,0 +1 @@ +https://github.com/ARMmbed/minimal-printf/#7a57a3e36a227a3e412cec55b0eeaf649b9fa7c9