Added LPP device ids in config file and added a script to generate binary for individual device (lora EUI/key parameters)

.gitignore

@@ -1,4 +1,3 @@
 *.pyc
 BUILD
 mbed_config.h
-mbed_app.json

main.cpp

@@ -126,14 +126,14 @@ static void send_message() {
     int16_t retcode;
 
 #if MBED_CONF_APP_BATTERY_ENABLED && MBED_CONF_APP_BATTERY_IN_LPP
-    cayenne.addAnalogInput(1, battery_voltage());
+    cayenne.addAnalogInput(MBED_CONF_APP_BATTERY_LPP_ID, battery_voltage());
 #endif
 
 #if MBED_CONF_APP_DHT_ENABLED
     int err = dht.read();
     if(err == DHT::SUCCESS) {
-        cayenne.addTemperature(1, dht.getTemperature());
-        cayenne.addRelativeHumidity(1, dht.getHumidity());
+        cayenne.addTemperature(MBED_CONF_APP_DHT_TEMP_LPP_ID, dht.getTemperature());
+        cayenne.addRelativeHumidity(MBED_CONF_APP_DHT_HUM_LPP_ID, dht.getHumidity());
     } else {
         debug("Error code : %d\r\n", err);
     }
@@ -142,7 +142,7 @@ static void send_message() {
 #if MBED_CONF_APP_HX711_ENABLED
     loadcell.powerUp();
     if(loadcell.waitReadyRetry(20, 100)) {
-        cayenne.addAnalogInput(2, loadcell.getUnits(5));
+        cayenne.addAnalogInput(MBED_CONF_APP_HX711_LPP_ID, loadcell.getUnits(5));
     }
     loadcell.powerDown();
 #endif

mbed_app.json

@@ -25,17 +25,21 @@
         "lora-pwr-amp-ctl":    { "value": "NC" },
         "lora-tcxo":           { "value": "NC" },
         "battery-enabled":     { "value": "false" },
+        "battery-lpp-id":      { "value": 1 },
         "battery-in-lpp":      { "value": "false" },
         "battery-adc":         { "value": "NC" },
         "battery-ratio":       { "value": "2.0f" },
-        "dht-enabled":         { "value": "false" },
-        "dht-type":            { "value": "DHT::DHT22" },
-        "dht-data":            { "value": "NC" },
         "hx711-enabled":       { "value": "false" },
+        "hx711-lpp-id":        { "value": 2 },
         "hx711-clk":           { "value": "NC" },
         "hx711-data":          { "value": "NC" },
         "hx711-scale":         { "value": "1.0f" },
-        "hx711-offset":        { "value": 0 }
+        "hx711-offset":        { "value": 0 },
+        "dht-enabled":         { "value": "false" },
+        "dht-temp-lpp-id":     { "value": 3 },
+        "dht-hum-lpp-id":      { "value": 4 },
+        "dht-type":            { "value": "DHT::DHT22" },
+        "dht-data":            { "value": "NC" }
     },
     "target_overrides": {
         "*": {
@@ -46,9 +50,9 @@
             "lora.over-the-air-activation": true,
             "lora.duty-cycle-on": false,
             "lora.phy": 0,
-            "lora.device-eui": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }",
-            "lora.application-eui": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }",
-            "lora.application-key": "{ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 }"
+            "lora.device-eui": "{ 0xAB, 0xBA, 0xAB, 0xBA, 0xAB, 0xBA, 0xAB, 0xBA }",
+            "lora.application-eui": "{ 0xAC, 0xCA, 0xAC, 0xCA, 0xAC, 0xCA, 0xAC, 0xCA }",
+            "lora.application-key": "{ 0xAD, 0xDA, 0xAD, 0xDA, 0xAD, 0xDA, 0xAD, 0xDA, 0xAD, 0xDA, 0xAD, 0xDA, 0xAD, 0xDA, 0xAD, 0xDA }"
         },
 
         "NUCLEO_L073RZ": {
@@ -80,14 +84,14 @@
             "battery-in-lpp":      true,
             "battery-adc":         "A1",
             "battery-ratio":       "2.0f",
-            "dht-enabled":         true,
-            "dht-data":            "D8",
-            "dht-type":            "DHT::DHT22",
             "hx711-enabled":       true,
             "hx711-clk":           "D6",
             "hx711-data":          "D7",
             "hx711-scale":         "21000.0f",
-            "hx711-offset":        59600
+            "hx711-offset":        59600,
+            "dht-enabled":         true,
+            "dht-data":            "D8",
+            "dht-type":            "DHT::DHT22"
         },
 
         "MTB_RAK811": {

scripts/gen_images.sh

@@ -0,0 +1,40 @@
+#!/bin/sh
+
+MASTERFILE=./BUILD/NUCLEO_L073RZ/GCC_ARM-RELEASE/waveofhoney-mbed5.bin
+
+# patterns
+DEVICEEUI=ABBAABBAABBAABBA
+APPEUI=ACCAACCAACCAACCA
+APPKEY=ADDAADDAADDAADDAADDAADDAADDAADDA
+
+if [ $# -ne 2 ]; then
+  echo "gen_images <master_binary> <devices_file>\n"
+  echo "devices file must be in the form :\n"
+  echo "dev1name:dev1eui:dev1appeui:dev1appkey"
+  echo "dev2name:dev2eui:dev2appeui:dev2appkey\n"
+  exit 1;
+fi
+
+MASTER=$1
+DEVICES=$2
+
+if [ ! -e $MASTER ]; then
+  echo "The master file $MASTER doesn't exists"
+  exit 1;
+fi
+
+if [ ! -e $DEVICES ]; then
+  echo "The devices file $DEVICES doesn't exists"
+  exit 1;
+fi
+
+for DEVICE in $(cat $DEVICES); do
+  name=$(echo $DEVICE | cut -d : -f 1)
+  deviceeui=$(echo $DEVICE | cut -d : -f 2)
+  appeui=$(echo $DEVICE | cut -d : -f 3)
+  appkey=$(echo $DEVICE | cut -d : -f 4)
+  echo $name
+  hexdump -ve '1/1 "%.2X"' $MASTERFILE | sed "s/$DEVICEEUI/$deviceeui/; s/$APPEUI/$appeui/; s/$APPKEY/$appkey/" | xxd -r -p > waveofhoney-${name}.bin
+done
+
+exit;